ns3::aodv::RoutingProtocol Class Reference

#include <introspected-doxygen.hpp>

Detailed Description

Config Paths

ns3::aodv::RoutingProtocol is accessible through the following paths with Config::Set and Config::Connect:

• "/NodeList/[i]/$ns3::aodv::RoutingProtocol"

Attributes

• HelloInterval: HELLO messages emission interval.
  • Set with class: ns3::TimeValue
  • Underlying type: Time -9.22337e+18ns:+9.22337e+18ns
  • Initial value: +1e+09ns
  • Flags: construct write read
• TtlStart: Initial TTL value for RREQ.
  • Set with class: ns3::UintegerValue
  • Underlying type: uint16_t 0:65535
  • Initial value: 1
  • Flags: construct write read
• TtlIncrement: TTL increment for each attempt using the expanding ring search for RREQ dissemination.
  • Set with class: ns3::UintegerValue
  • Underlying type: uint16_t 0:65535
  • Initial value: 2
  • Flags: construct write read
• TtlThreshold: Maximum TTL value for expanding ring search, TTL = NetDiameter is used beyond this value.
  • Set with class: ns3::UintegerValue
  • Underlying type: uint16_t 0:65535
  • Initial value: 7
  • Flags: construct write read
• TimeoutBuffer: Provide a buffer for the timeout.
  • Set with class: ns3::UintegerValue
  • Underlying type: uint16_t 0:65535
  • Initial value: 2
  • Flags: construct write read
• RreqRetries: Maximum number of retransmissions of RREQ to discover a route
  • Set with class: ns3::UintegerValue
  • Underlying type: uint32_t 0:4294967295
  • Initial value: 2
  • Flags: construct write read
• RreqRateLimit: Maximum number of RREQ per second.
  • Set with class: ns3::UintegerValue
  • Underlying type: uint32_t 0:4294967295
  • Initial value: 10
  • Flags: construct write read
• RerrRateLimit: Maximum number of RERR per second.
  • Set with class: ns3::UintegerValue
  • Underlying type: uint32_t 0:4294967295
  • Initial value: 10
  • Flags: construct write read
• NodeTraversalTime: Conservative estimate of the average one hop traversal time for packets and should include queuing delays, interrupt processing times and transfer times.
  • Set with class: ns3::TimeValue
  • Underlying type: Time -9.22337e+18ns:+9.22337e+18ns
  • Initial value: +4e+07ns
  • Flags: construct write read
• NextHopWait: Period of our waiting for the neighbour's RREP_ACK = 10 ms + NodeTraversalTime
  • Set with class: ns3::TimeValue
  • Underlying type: Time -9.22337e+18ns:+9.22337e+18ns
  • Initial value: +5e+07ns
  • Flags: construct write read
• ActiveRouteTimeout: Period of time during which the route is considered to be valid
  • Set with class: ns3::TimeValue
  • Underlying type: Time -9.22337e+18ns:+9.22337e+18ns
  • Initial value: +3e+09ns
  • Flags: construct write read
• MyRouteTimeout: Value of lifetime field in RREP generating by this node = 2 * max(ActiveRouteTimeout, PathDiscoveryTime)
  • Set with class: ns3::TimeValue
  • Underlying type: Time -9.22337e+18ns:+9.22337e+18ns
  • Initial value: +1.12e+10ns
  • Flags: construct write read
• BlackListTimeout: Time for which the node is put into the blacklist = RreqRetries * NetTraversalTime
  • Set with class: ns3::TimeValue
  • Underlying type: Time -9.22337e+18ns:+9.22337e+18ns
  • Initial value: +5.6e+09ns
  • Flags: construct write read
• DeletePeriod: DeletePeriod is intended to provide an upper bound on the time for which an upstream node A can have a neighbor B as an active next hop for destination D, while B has invalidated the route to D. = 5 * max (HelloInterval, ActiveRouteTimeout)
  • Set with class: ns3::TimeValue
  • Underlying type: Time -9.22337e+18ns:+9.22337e+18ns
  • Initial value: +1.5e+10ns
  • Flags: construct write read
• NetDiameter: Net diameter measures the maximum possible number of hops between two nodes in the network
  • Set with class: ns3::UintegerValue
  • Underlying type: uint32_t 0:4294967295
  • Initial value: 35
  • Flags: construct write read
• NetTraversalTime: Estimate of the average net traversal time = 2 * NodeTraversalTime * NetDiameter
  • Set with class: ns3::TimeValue
  • Underlying type: Time -9.22337e+18ns:+9.22337e+18ns
  • Initial value: +2.8e+09ns
  • Flags: construct write read
• PathDiscoveryTime: Estimate of maximum time needed to find route in network = 2 * NetTraversalTime
  • Set with class: ns3::TimeValue
  • Underlying type: Time -9.22337e+18ns:+9.22337e+18ns
  • Initial value: +5.6e+09ns
  • Flags: construct write read
• MaxQueueLen: Maximum number of packets that we allow a routing protocol to buffer.
  • Set with class: ns3::UintegerValue
  • Underlying type: uint32_t 0:4294967295
  • Initial value: 64
  • Flags: construct write read
• MaxQueueTime: Maximum time packets can be queued (in seconds)
  • Set with class: ns3::TimeValue
  • Underlying type: Time -9.22337e+18ns:+9.22337e+18ns
  • Initial value: +3e+10ns
  • Flags: construct write read
• AllowedHelloLoss: Number of hello messages which may be loss for valid link.
  • Set with class: ns3::UintegerValue
  • Underlying type: uint16_t 0:65535
  • Initial value: 2
  • Flags: construct write read
• GratuitousReply: Indicates whether a gratuitous RREP should be unicast to the node originated route discovery.
  • Set with class: BooleanValue
  • Underlying type: bool
  • Initial value: true
  • Flags: construct write read
• DestinationOnly: Indicates only the destination may respond to this RREQ.
  • Set with class: BooleanValue
  • Underlying type: bool
  • Initial value: false
  • Flags: construct write read
• EnableHello: Indicates whether a hello messages enable.
  • Set with class: BooleanValue
  • Underlying type: bool
  • Initial value: true
  • Flags: construct write read
• EnableBroadcast: Indicates whether a broadcast data packets forwarding enable.
  • Set with class: BooleanValue
  • Underlying type: bool
  • Initial value: true
  • Flags: construct write read
• UniformRv: Access to the underlying UniformRandomVariable
  • Set with class: ns3::PointerValue
  • Underlying type: ns3::Ptr< ns3::UniformRandomVariable>
  • Initial value: ns3::UniformRandomVariable
  • Flags: construct write read

No TraceSources are defined for this type.
Size of this type is 800 bytes (on a 64-bit architecture).

---

The documentation for this class was generated from the following file:

• ndnSIM/docs/introspected-doxygen.hpp