FAQ

Boost libraries

Note

My ubuntu/redhat/freebsd have an old version of boost libraries. How can I get the latest one?

Installing boost libraries to /usr/local

Note

The following instructions are for those who want to install latest version of boost libraries and has root access.

The following commands would install the latest version of boost libraries (at the time of writing, version 1.62) ot /usr/local, assuming you have a root access to your machine. If you don’t have root access, please refer to section Installing boost libraries to a non-privileged location.

Note

If you are using Ubuntu, make sure that you have installed libbz2-dev, otherwise not all libraries required by ndnSIM will be installed (see Common pitfalls)

1
2
3
4
5
 wget http://downloads.sourceforge.net/project/boost/boost/1.62.0/boost_1_62_0.tar.bz2
 tar jxf boost_1_62_0.tar.bz2
 cd boost_1_62_0
 ./bootstrap.sh
 sudo ./b2 --prefix=/usr/local install

The following commands should allow compilation and run of NS-3 simulations with custom install of boost libraries:

1
2
3
4
 cd <ns-3>
 ./waf configure --boost-includes=/usr/local/include --boost-libs=/usr/local/lib --enable-examples
 ./waf
 LD_LIBRARY_PATH=/usr/local/lib NS_LOG=ndn.Face:ndn.Consumer ./waf --run=ndn-simple

Note

LD_LIBRARY_PATH=/usr/local/lib is necessary on Linux platform in order for the dynamic linker to find libraries installed in a location different from one of the folders specified in /etc/ld.so.conf.

Installing boost libraries to a non-privileged location

Note

Follow these general instructions if you are trying to installboost libraries to a non-privileged location (i.e., you do not have root access), but something is going wrong.

Normally, to compile and install boost libraries in non-privileged mode, you would need to issue following commands (e.g., for boost version 1.62.0):

1
2
3
4
5
6
 export BOOSTDIR=/home/non-privileged-user/boost
 wget http://downloads.sourceforge.net/project/boost/boost/1.62.0/boost_1_62_0.tar.bz2
 tar jxf boost_1_62_0.tar.bz2
 cd boost_1_62_0
 ./bootstrap.sh
 ./b2 --prefix=$BOOSTDIR install

However, after the following steps you may still not able to use ndnSIM.

Common pitfalls

The common pitfalls is with the boost iostreams library, which is required by ndnSIM, but failed to build because of the missing bzip2 library. This problem can be easily fixed by downloading and installing bzip2 library, e.g., using the following steps:

1
2
3
4
 wget http://www.bzip.org/1.0.6/bzip2-1.0.6.tar.gz
 tar zxf bzip2-1.0.6.tar.gz
 cd bzip2-1.0.6
 make PREFIX=$BOOSTDIR CFLAGS="-fPIC -O2 -g" install

Afte bzip2 library is installed, you may recompile and reinstall boost libraries using custom compilation flags:

./b2 --prefix=$BOOSTDIR cxxflags=-I$BOOSTDIR/include linkflags=-L$BOOSTDIR/lib install

Alternatively, you can solve this particular problem by installing development package for bzip2 library (if you have root access). For example, on Ubuntu 12.04 it would be the following command:

sudo apt-get install libbz2-dev

And then compiling and installing boost without custom compilation flags:

./b2 --prefix=$BOOSTDIR

The following commands should allow compilation and run of NS-3 simulations with custom install of boost libraries:

cd <ns-3>
./waf configure --boost-includes=$BOOSTDIR/include --boost-libs=$BOOSTDIR/lib --enable-examples --enable-ndn-plugins=topology,mobility
./waf
LD_LIBRARY_PATH=$BOOSTDIR/lib NS_LOG=ndn.Face:ndn.Consumer ./waf --run=ndn-simple

Note

LD_LIBRARY_PATH=$BOOSTDIR/lib is necessary on Linux platform in order for the dynamic linker to find libraries installed in a location different from one of the folders specified in /etc/ld.so.conf.

Visualizer problems

Visualizer module is not working

Every time I’m trying to run visualizer, I get the following error:

Waf: Entering directory `/ndnSIM/ns-3/build'
Could not find a task generator for the name 'ns3-visualizer'..

Something is wrong with your python bindings and python bindings dependencies. Please follow the Prerequisites section that lists what should be installed in order to run visualizer.

Problems with the gtk python module on macOS

./waf configure got stuck during the gtk module check

When running ./waf configure, the process freezes at the stage of detecting gtk module:

...
Checking for 'sqlite3'                                         : yes
Checking for header linux/if_tun.h                             : not found
Checking for python module 'gtk'                               :

If ./waf configure on OSX got stuck during the gtk python module check, it most likely means that something is wrong with X11 required by this module. You can try to reinstall X11 (XQuartz) or configure NS-3 without python bindings (./waf configure --disable-python). Note that disabling python bindings will also disable the visualizer module.

Code questions

Failing a link between nodes

How can I fail a link between to NDN nodes?

Refer to Link Control Helper.

Network-level NACKs

How the current version of ndnSIM handles network-level NACKs?

ndnSIM 2.3 includes full support of NDNLPv2 and, thus, can be used to simulate network-level NACKs across simulation nodes.

General questions

Errors/bugs reporting

I found an error in the documentation / bug in the code. What should I do?

Please submit a bug report on redmine, or tell us about the error on our mailing list .