ns3::RandomVariableStream

Stream: The stream number for this RNG stream. -1 means "allocate a stream automatically". Note that if -1 is set, Get will return -1 so that it is not possible to know which value was automatically allocated.
Antithetic: Set this RNG stream to generate antithetic values

ns3::UniformRandomVariable

Min: The lower bound on the values returned by this RNG stream.
Max: The upper bound on the values returned by this RNG stream.

ns3::ConstantRandomVariable

Constant: The constant value returned by this RNG stream.

ns3::SequentialRandomVariable

Min: The first value of the sequence.
Max: One more than the last value of the sequence.
Increment: The sequence random variable increment.
Consecutive: The number of times each member of the sequence is repeated.

ns3::ExponentialRandomVariable

Mean: The mean of the values returned by this RNG stream.
Bound: The upper bound on the values returned by this RNG stream.

ns3::ParetoRandomVariable

Mean: The mean parameter for the Pareto distribution returned by this RNG stream.
Shape: The shape parameter for the Pareto distribution returned by this RNG stream.
Bound: The upper bound on the values returned by this RNG stream.

ns3::WeibullRandomVariable

Scale: The scale parameter for the Weibull distribution returned by this RNG stream.
Shape: The shape parameter for the Weibull distribution returned by this RNG stream.
Bound: The upper bound on the values returned by this RNG stream.

ns3::NormalRandomVariable

Mean: The mean value for the normal distribution returned by this RNG stream.
Variance: The variance value for the normal distribution returned by this RNG stream.
Bound: The bound on the values returned by this RNG stream.

ns3::LogNormalRandomVariable

Mu: The mu value for the log-normal distribution returned by this RNG stream.
Sigma: The sigma value for the log-normal distribution returned by this RNG stream.

ns3::GammaRandomVariable

Alpha: The alpha value for the gamma distribution returned by this RNG stream.
Beta: The beta value for the gamma distribution returned by this RNG stream.

ns3::ErlangRandomVariable

K: The k value for the Erlang distribution returned by this RNG stream.
Lambda: The lambda value for the Erlang distribution returned by this RNG stream.

ns3::TriangularRandomVariable

Mean: The mean value for the triangular distribution returned by this RNG stream.
Min: The lower bound on the values returned by this RNG stream.
Max: The upper bound on the values returned by this RNG stream.

ns3::ZipfRandomVariable

N: The n value for the Zipf distribution returned by this RNG stream.
Alpha: The alpha value for the Zipf distribution returned by this RNG stream.

ns3::ZetaRandomVariable

Alpha: The alpha value for the zeta distribution returned by this RNG stream.

ns3::DataCollectionObject

Name: Object's name
Enabled: Object's enabled status

ns3::Probe

Start: Time data collection starts
Stop: Time when data collection stops. The special time value of 0 disables this attribute

ns3::Application

StartTime: Time at which the application will start
StopTime: Time at which the application will stop

ns3::Channel

Id: The id (unique integer) of this Channel.

ns3::ChannelListPriv

ChannelList: The list of all channels created during the simulation.

ns3::Node

DeviceList: The list of devices associated to this Node.
ApplicationList: The list of applications associated to this Node.
Id: The id (unique integer) of this Node.
SystemId: The systemId of this node: a unique integer used for parallel simulations.

ns3::NodeListPriv

NodeList: The list of all nodes created during the simulation.

ns3::DropTailQueue

Mode: Whether to use bytes (see MaxBytes) or packets (see MaxPackets) as the maximum queue size metric.
MaxPackets: The maximum number of packets accepted by this DropTailQueue.
MaxBytes: The maximum number of bytes accepted by this DropTailQueue.

ns3::ErrorModel

IsEnabled: Whether this ErrorModel is enabled or not.

ns3::RateErrorModel

ErrorUnit: The error unit
ErrorRate: The error rate.
RanVar: The decision variable attached to this error model.

ns3::BurstErrorModel

ErrorRate: The burst error event.
BurstStart: The decision variable attached to this error model.
BurstSize: The number of packets being corrupted at one drop.

ns3::PacketSocket

RcvBufSize: PacketSocket maximum receive buffer size (bytes)

ns3::PcapFileWrapper

CaptureSize: Maximum length of captured packets (cf. pcap snaplen)

ns3::RedQueue

Mode: Determines unit for QueueLimit
MeanPktSize: Average of packet size
IdlePktSize: Average packet size used during idle times. Used when m_cautions = 3
Wait: True for waiting between dropped packets
Gentle: True to increases dropping probability slowly when average queue exceeds maxthresh
MinTh: Minimum average length threshold in packets/bytes
MaxTh: Maximum average length threshold in packets/bytes
QueueLimit: Queue limit in bytes/packets
QW: Queue weight related to the exponential weighted moving average (EWMA)
LInterm: The maximum probability of dropping a packet
Ns1Compat: NS-1 compatibility
LinkBandwidth: The RED link bandwidth
LinkDelay: The RED link delay

ns3::SimpleChannel

Delay: Transmission delay through the channel

ns3::SimpleNetDevice

ReceiveErrorModel: The receiver error model used to simulate packet loss
PointToPointMode: The device is configured in Point to Point mode
TxQueue: A queue to use as the transmit queue in the device.
DataRate: The default data rate for point to point links. Zero means infinite

ns3::PacketSocketClient

MaxPackets: The maximum number of packets the application will send (zero means infinite)
Interval: The time to wait between packets
PacketSize: Size of packets generated (bytes).

ns3::MobilityModel

Position: The current position of the mobility model.
Velocity: The current velocity of the mobility model.

ns3::GaussMarkovMobilityModel

Bounds: Bounds of the area to cruise.
TimeStep: Change current direction and speed after moving for this time.
Alpha: A constant representing the tunable parameter in the Gauss-Markov model.
MeanVelocity: A random variable used to assign the average velocity.
MeanDirection: A random variable used to assign the average direction.
MeanPitch: A random variable used to assign the average pitch.
NormalVelocity: A gaussian random variable used to calculate the next velocity value.
NormalDirection: A gaussian random variable used to calculate the next direction value.
NormalPitch: A gaussian random variable used to calculate the next pitch value.

ns3::HierarchicalMobilityModel

Child: The child mobility model.
Parent: The parent mobility model.

ns3::GridPositionAllocator

GridWidth: The number of objects layed out on a line.
MinX: The x coordinate where the grid starts.
MinY: The y coordinate where the grid starts.
DeltaX: The x space between objects.
DeltaY: The y space between objects.
LayoutType: The type of layout.

ns3::RandomRectanglePositionAllocator

X: A random variable which represents the x coordinate of a position in a random rectangle.
Y: A random variable which represents the y coordinate of a position in a random rectangle.

ns3::RandomBoxPositionAllocator

X: A random variable which represents the x coordinate of a position in a random box.
Y: A random variable which represents the y coordinate of a position in a random box.
Z: A random variable which represents the z coordinate of a position in a random box.

ns3::RandomDiscPositionAllocator

Theta: A random variable which represents the angle (gradients) of a position in a random disc.
Rho: A random variable which represents the radius of a position in a random disc.
X: The x coordinate of the center of the random position disc.
Y: The y coordinate of the center of the random position disc.

ns3::UniformDiscPositionAllocator

rho: The radius of the disc
X: The x coordinate of the center of the disc.
Y: The y coordinate of the center of the disc.

ns3::RandomDirection2dMobilityModel

Bounds: The 2d bounding area
Speed: A random variable to control the speed (m/s).
Pause: A random variable to control the pause (s).

ns3::RandomWalk2dMobilityModel

Bounds: Bounds of the area to cruise.
Time: Change current direction and speed after moving for this delay.
Distance: Change current direction and speed after moving for this distance.
Mode: The mode indicates the condition used to change the current speed and direction
Direction: A random variable used to pick the direction (gradients).
Speed: A random variable used to pick the speed (m/s).

ns3::RandomWaypointMobilityModel

Speed: A random variable used to pick the speed of a random waypoint model.
Pause: A random variable used to pick the pause of a random waypoint model.
PositionAllocator: The position model used to pick a destination point.

ns3::SteadyStateRandomWaypointMobilityModel

MinSpeed: Minimum speed value, [m/s]
MaxSpeed: Maximum speed value, [m/s]
MinPause: Minimum pause value, [s]
MaxPause: Maximum pause value, [s]
MinX: Minimum X value of traveling region, [m]
MaxX: Maximum X value of traveling region, [m]
MinY: Minimum Y value of traveling region, [m]
MaxY: Maximum Y value of traveling region, [m]
Z: Z value of traveling region (fixed), [m]

ns3::WaypointMobilityModel

NextWaypoint: The next waypoint used to determine position.
WaypointsLeft: The number of waypoints remaining.
LazyNotify: Only call NotifyCourseChange when position is calculated.
InitialPositionIsWaypoint: Calling SetPosition with no waypoints creates a waypoint.

ns3::RandomPropagationDelayModel

Variable: The random variable which generates random delays (s).

ns3::ConstantSpeedPropagationDelayModel

Speed: The speed (m/s)

ns3::RandomPropagationLossModel

Variable: The random variable used to pick a loss everytime CalcRxPower is invoked.

ns3::FriisPropagationLossModel

Frequency: The carrier frequency (in Hz) at which propagation occurs (default is 5.15 GHz).
SystemLoss: The system loss
MinLoss: The minimum value (dB) of the total loss, used at short ranges. Note:

ns3::TwoRayGroundPropagationLossModel

Frequency: The carrier frequency (in Hz) at which propagation occurs (default is 5.15 GHz).
SystemLoss: The system loss
MinDistance: The distance under which the propagation model refuses to give results (m)
HeightAboveZ: The height of the antenna (m) above the node's Z coordinate

ns3::LogDistancePropagationLossModel

Exponent: The exponent of the Path Loss propagation model
ReferenceDistance: The distance at which the reference loss is calculated (m)
ReferenceLoss: The reference loss at reference distance (dB). (Default is Friis at 1m with 5.15 GHz)

ns3::ThreeLogDistancePropagationLossModel

Distance0: Beginning of the first (near) distance field
Distance1: Beginning of the second (middle) distance field.
Distance2: Beginning of the third (far) distance field.
Exponent0: The exponent for the first field.
Exponent1: The exponent for the second field.
Exponent2: The exponent for the third field.
ReferenceLoss: The reference loss at distance d0 (dB). (Default is Friis at 1m with 5.15 GHz)

ns3::NakagamiPropagationLossModel

Distance1: Beginning of the second distance field. Default is 80m.
Distance2: Beginning of the third distance field. Default is 200m.
m0: m0 for distances smaller than Distance1. Default is 1.5.
m1: m1 for distances smaller than Distance2. Default is 0.75.
m2: m2 for distances greater than Distance2. Default is 0.75.
ErlangRv: Access to the underlying ErlangRandomVariable
GammaRv: Access to the underlying GammaRandomVariable

ns3::FixedRssLossModel

Rss: The fixed receiver Rss.

ns3::MatrixPropagationLossModel

DefaultLoss: The default value for propagation loss, dB.

ns3::RangePropagationLossModel

MaxRange: Maximum Transmission Range (meters)

ns3::JakesProcess

DopplerFrequencyHz: Corresponding doppler frequency[Hz]
NumberOfOscillators: The number of oscillators

ns3::Cost231PropagationLossModel

Lambda: The wavelength (default is 2.3 GHz at 300 000 km/s).
Frequency: The Frequency (default is 2.3 GHz).
BSAntennaHeight: BS Antenna Height (default is 50m).
SSAntennaHeight: SS Antenna Height (default is 3m).
MinDistance: The distance under which the propagation model refuses to give results (m)

ns3::OkumuraHataPropagationLossModel

Frequency: The propagation frequency in Hz
Environment: Environment Scenario
CitySize: Dimension of the city

ns3::ItuR1411LosPropagationLossModel

Frequency: The propagation frequency in Hz

ns3::ItuR1411NlosOverRooftopPropagationLossModel

Frequency: The Frequency (default is 2.106 GHz).
Environment: Environment Scenario
CitySize: Dimension of the city
RooftopLevel: The height of the rooftop level in meters
StreetsOrientation: The orientation of streets in degrees [0,90] with respect to the direction of propagation
StreetsWidth: The width of streets
BuildingsExtend: The distance over which the buildings extend
BuildingSeparation: The separation between buildings

ns3::CosineAntennaModel

Beamwidth: The 3dB beamwidth (degrees)
Orientation: The angle (degrees) that expresses the orientation of the antenna on the x-y plane relative to the x axis
MaxGain: The gain (dB) at the antenna boresight (the direction of maximum gain)

ns3::ParabolicAntennaModel

Beamwidth: The 3dB beamwidth (degrees)
Orientation: The angle (degrees) that expresses the orientation of the antenna on the x-y plane relative to the x axis
MaxAttenuation: The maximum attenuation (dB) of the antenna radiation pattern.

ns3::ConstantSpectrumPropagationLossModel

Loss: Path loss (dB) between transmitter and receiver

ns3::SingleModelSpectrumChannel

MaxLossDb: If a single-frequency PropagationLossModel is used, this value represents the maximum loss in dB for which transmissions will be passed to the receiving PHY. Signals for which the PropagationLossModel returns a loss bigger than this value will not be propagated to the receiver. This parameter is to be used to reduce the computational load by not propagating signals that are far beyond the interference range. Note that the default value corresponds to considering all signals for reception. Tune this value with care.

ns3::MultiModelSpectrumChannel

MaxLossDb: If a single-frequency PropagationLossModel is used, this value represents the maximum loss in dB for which transmissions will be passed to the receiving PHY. Signals for which the PropagationLossModel returns a loss bigger than this value will not be propagated to the receiver. This parameter is to be used to reduce the computational load by not propagating signals that are far beyond the interference range. Note that the default value corresponds to considering all signals for reception. Tune this value with care.

ns3::WaveformGenerator

Period: the period (=1/frequency)
DutyCycle: the duty cycle of the generator, i.e., the fraction of the period that is occupied by a signal

ns3::SpectrumAnalyzer

Resolution: the lengh of the time interval over which the power spectral density of incoming signals is averaged
NoisePowerSpectralDensity: the power spectral density of the measuring instrument noise, in Watt/Hz. Mostly useful to make spectrograms look more similar to those obtained by real devices. Defaults to the value for thermal noise at 300K.

ns3::AlohaNoackNetDevice

Address: The MAC address of this device.
Queue: packets being transmitted get queued here
Mtu: The Maximum Transmission Unit
Phy: The PHY layer attached to this device.

ns3::HalfDuplexIdealPhy

Rate: The PHY rate used by this device

ns3::NonCommunicatingNetDevice

Phy: The PHY layer attached to this device.

ns3::LrWpanMac

PanId: 16-bit identifier of the associated PAN

ns3::LrWpanNetDevice

Channel: The channel attached to this device
Phy: The PHY layer attached to this device.
Mac: The MAC layer attached to this device.
UseAcks: Request acknowledgments for data frames.

ns3::LrWpanLqiTag

Lqi: The lqi of the last packet received

ns3::NullMessageSimulatorImpl

SchedulerTune: Null Message scheduler tuning parameter

ns3::PointToPointNetDevice

Mtu: The MAC-level Maximum Transmission Unit
Address: The MAC address of this device.
DataRate: The default data rate for point to point links
ReceiveErrorModel: The receiver error model used to simulate packet loss
InterframeGap: The time to wait between packet (frame) transmissions
TxQueue: A queue to use as the transmit queue in the device.

ns3::PointToPointChannel

Delay: Transmission delay through the channel

ns3::BridgeNetDevice

Mtu: The MAC-level Maximum Transmission Unit
EnableLearning: Enable the learning mode of the Learning Bridge
ExpirationTime: Time it takes for learned MAC state entry to expire.

ns3::IpL4Protocol

ProtocolNumber: The Ip protocol number.

ns3::Ipv4Interface

ArpCache: The arp cache for this ipv4 interface

ns3::Ipv4L3Protocol

DefaultTos: The TOS value set by default on all outgoing packets generated on this node.
DefaultTtl: The TTL value set by default on all outgoing packets generated on this node.
FragmentExpirationTimeout: When this timeout expires, the fragments will be cleared from the buffer.
InterfaceList: The set of Ipv4 interfaces associated to this Ipv4 stack.

ns3::Ipv4

IpForward: Globally enable or disable IP forwarding for all current and future Ipv4 devices.
WeakEsModel: RFC1122 term for whether host accepts datagram with a dest. address on another interface

ns3::UdpL4Protocol

SocketList: The list of sockets associated to this protocol.

ns3::TcpL4Protocol

RttEstimatorType: Type of RttEstimator objects.
SocketType: Socket type of TCP objects.
SocketList: The list of sockets associated to this protocol.

ns3::RttMeanDeviation

Gain: Gain used in estimating the RTT, must be 0 < Gain < 1

ns3::RttEstimator

MaxMultiplier: Maximum RTO Multiplier
InitialEstimation: Initial RTT estimation
MinRTO: Minimum retransmit timeout value

ns3::TcpNewReno

ReTxThreshold: Threshold for fast retransmit
LimitedTransmit: Enable limited transmit

ns3::TcpSocketBase

MaxSegLifetime: Maximum segment lifetime in seconds, use for TIME_WAIT state transition to CLOSED state
MaxWindowSize: Max size of advertised window
IcmpCallback: Callback invoked whenever an icmp error is received on this socket.
IcmpCallback6: Callback invoked whenever an icmpv6 error is received on this socket.
WindowScaling: Enable or disable Window Scaling option
Timestamp: Enable or disable Timestamp option

ns3::TcpSocket

SndBufSize: TcpSocket maximum transmit buffer size (bytes)
RcvBufSize: TcpSocket maximum receive buffer size (bytes)
SegmentSize: TCP maximum segment size in bytes (may be adjusted based on MTU discovery)
InitialSlowStartThreshold: TCP initial slow start threshold (bytes)
InitialCwnd: TCP initial congestion window size (segments)
ConnTimeout: TCP retransmission timeout when opening connection (seconds)
ConnCount: Number of connection attempts (SYN retransmissions) before returning failure
DelAckTimeout: Timeout value for TCP delayed acks, in seconds
DelAckCount: Number of packets to wait before sending a TCP ack
TcpNoDelay: Set to true to disable Nagle's algorithm
PersistTimeout: Persist timeout to probe for rx window

ns3::ArpCache

AliveTimeout: When this timeout expires, the matching cache entry needs refreshing
DeadTimeout: When this timeout expires, a new attempt to resolve the matching entry is made
WaitReplyTimeout: When this timeout expires, the cache entries will be scanned and entries in WaitReply state will resend ArpRequest unless MaxRetries has been exceeded, in which case the entry is marked dead
MaxRetries: Number of retransmissions of ArpRequest before marking dead
PendingQueueSize: The size of the queue for packets pending an arp reply.

ns3::ArpL3Protocol

CacheList: The list of ARP caches
RequestJitter: The jitter in ms a node is allowed to wait before sending an ARP request. Some jitter aims to prevent collisions. By default, the model will wait for a duration in ms defined by a uniform random-variable between 0 and RequestJitter

ns3::UdpSocketImpl

IcmpCallback: Callback invoked whenever an icmp error is received on this socket.
IcmpCallback6: Callback invoked whenever an icmpv6 error is received on this socket.

ns3::UdpSocket

RcvBufSize: UdpSocket maximum receive buffer size (bytes)
IpTtl: socket-specific TTL for unicast IP packets (if non-zero)
IpMulticastTtl: socket-specific TTL for multicast IP packets (if non-zero)
IpMulticastIf: interface index for outgoing multicast on this socket; -1 indicates to use default interface
IpMulticastLoop: whether outgoing multicast sent also to loopback interface
MtuDiscover: If enabled, every outgoing ip packet will have the DF flag set.

ns3::Ipv4RawSocketImpl

Protocol: Protocol number to match.
IcmpFilter: Any icmp header whose type field matches a bit in this filter is dropped. Type must be less than 32.
IpHeaderInclude: Include IP Header information (a.k.a setsockopt (IP_HDRINCL)).

ns3::NdiscCache

UnresolvedQueueSize: Size of the queue for packets pending an NA reply.

ns3::Ipv6L3Protocol

DefaultTtl: The TTL value set by default on all outgoing packets generated on this node.
DefaultTclass: The TCLASS value set by default on all outgoing packets generated on this node.
InterfaceList: The set of IPv6 interfaces associated to this IPv6 stack.
SendIcmpv6Redirect: Send the ICMPv6 Redirect when appropriate.

ns3::Ipv6

IpForward: Globally enable or disable IP forwarding for all current and future IPv6 devices.
MtuDiscover: If disabled, every interface will have its MTU set to 1280 bytes.

ns3::Ipv6RawSocketImpl

Protocol: Protocol number to match.

ns3::Ipv6Extension

ExtensionNumber: The IPv6 extension number.

ns3::Ipv6ExtensionRoutingDemux

Routing Extensions: The set of IPv6 Routing extensions registered with this demux.

ns3::Ipv6ExtensionDemux

Extensions: The set of IPv6 extensions registered with this demux.

ns3::Ipv6Option

OptionNumber: The IPv6 option number.

ns3::Ipv6OptionDemux

Options: The set of IPv6 options registered with this demux.

ns3::Icmpv6L4Protocol

DAD: Always do DAD check.
SolicitationJitter: The jitter in ms a node is allowed to wait before sending any solicitation . Some jitter aims to prevent collisions. By default, the model will wait for a duration in ms defined by a uniform random-variable between 0 and SolicitationJitter

ns3::TcpTahoe

ReTxThreshold: Threshold for fast retransmit

ns3::TcpReno

ReTxThreshold: Threshold for fast retransmit

ns3::TcpWestwood

FilterType: Use this to choose no filter or Tustin's approximation filter
ProtocolType: Use this to let the code run as Westwood or WestwoodPlus

ns3::CoDelQueue

Mode: Whether to use Bytes (see MaxBytes) or Packets (see MaxPackets) as the maximum queue size metric.
MaxPackets: The maximum number of packets accepted by this CoDelQueue.
MaxBytes: The maximum number of bytes accepted by this CoDelQueue.
MinBytes: The CoDel algorithm minbytes parameter.
Interval: The CoDel algorithm interval
Target: The CoDel algorithm target queue delay

ns3::Ipv4GlobalRouting

RandomEcmpRouting: Set to true if packets are randomly routed among ECMP; set to false for using only one route consistently
RespondToInterfaceEvents: Set to true if you want to dynamically recompute the global routes upon Interface notification events (up/down, or add/remove address)

ns3::Ipv6PmtuCache

CacheExpiryTime: Validity time for a Path MTU entry. Default is 10 minutes, minimum is 5 minutes.

ns3::RipNg

UnsolicitedRoutingUpdate: The time between two Unsolicited Routing Updates.
StartupDelay: Maximum random delay for protocol startup (send route requests).
TimeoutDelay: The delay to invalidate a route.
GarbageCollectionDelay: The delay to delete an expired route.
MinTriggeredCooldown: Min cooldown delay after a Triggered Update.
MaxTriggeredCooldown: Max cooldown delay after a Triggered Update.
SplitHorizon: Split Horizon strategy.

ns3::WimaxNetDevice

Mtu: The MAC-level Maximum Transmission Unit
Phy: The PHY layer attached to this device.
Channel: The channel attached to this device.
RTG: receive/transmit transition gap.
TTG: transmit/receive transition gap.
ConnectionManager: The connection manager attached to this device.
BurstProfileManager: The burst profile manager attached to this device.
BandwidthManager: The bandwidth manager attached to this device.
InitialRangingConnection: Initial ranging connection
BroadcastConnection: Broadcast connection

ns3::BaseStationNetDevice

BSScheduler: Downlink Scheduler for BS
InitialRangInterval: Time between Initial Ranging regions assigned by the BS. Maximum is 2s
DcdInterval: Time between transmission of DCD messages. Maximum value is 10s.
UcdInterval: Time between transmission of UCD messages. Maximum value is 10s.
IntervalT8: Wait for DSA/DSC Acknowledge timeout. Maximum 300ms.
RangReqOppSize: The ranging opportunity size in symbols
BwReqOppSize: The bandwidth request opportunity size in symbols
MaxRangCorrectionRetries: Number of retries on contention Ranging Requests
SSManager: The ss manager attached to this device.
Scheduler: The BS scheduler attached to this device.
LinkManager: The link manager attached to this device.
UplinkScheduler: The uplink scheduler attached to this device.
BsIpcsPacketClassifier: The uplink IP packet classifier attached to this device.
ServiceFlowManager: The service flow manager attached to this device.

ns3::SubscriberStationNetDevice

BasicConnection: Basic connection
PrimaryConnection: Primary connection
LostDlMapInterval: Time since last received DL-MAP message before downlink synchronization is considered lost. Maximum is 600ms
LostUlMapInterval: Time since last received UL-MAP before uplink synchronization is considered lost, maximum is 600.
MaxDcdInterval: Maximum time between transmission of DCD messages. Maximum is 10s
MaxUcdInterval: Maximum time between transmission of UCD messages. Maximum is 10s
IntervalT1: Wait for DCD timeout. Maximum is 5*maxDcdInterval
IntervalT2: Wait for broadcast ranging timeout, i.e., wait for initial ranging opportunity. Maximum is 5*Ranging interval
IntervalT3: ranging Response reception timeout following the transmission of a ranging request. Maximum is 200ms
IntervalT7: wait for DSA/DSC/DSD Response timeout. Maximum is 1s
IntervalT12: Wait for UCD descriptor.Maximum is 5*MaxUcdInterval
IntervalT20: Time the SS searches for preambles on a given channel. Minimum is 2 MAC frames
IntervalT21: time the SS searches for (decodable) DL-MAP on a given channel
MaxContentionRangingRetries: Number of retries on contention Ranging Requests
SSScheduler: The ss scheduler attached to this device.
LinkManager: The ss link manager attached to this device.
Classifier: The ss classifier attached to this device.

ns3::WimaxPhy

Channel: Wimax channel
FrameDuration: The frame duration in seconds.
Frequency: The central frequency in KHz.
Bandwidth: The channel bandwidth in Hz.

ns3::WimaxConnection

Type: Connection type
TxQueue: Transmit queue

ns3::SimpleOfdmWimaxPhy

NoiseFigure: Loss (dB) in the Signal-to-Noise-Ratio due to non-idealities in the receiver.
TxPower: Transmission power (dB).
G: This is the ratio of CP time to useful time.
TxGain: Transmission gain (dB).
RxGain: Reception gain (dB).
Nfft: FFT size
TraceFilePath: Path to the directory containing SNR to block error rate files

ns3::UplinkSchedulerMBQoS

WindowInterval: The time to wait to reset window

ns3::WimaxMacQueue

MaxSize: Maximum size

ns3::ConfigStore

Mode: Configuration mode
Filename: The file where the configuration should be saved to or loaded from.
FileFormat: Type of file format

ns3::Building

NRoomsX: The number of rooms in the X axis.
NRoomsY: The number of rooms in the Y axis.
NFloors: The number of floors of this building.
Id: The id (unique integer) of this Building.
Boundaries: The boundaries of this Building as a value of type ns3::Box
Type: The type of building
ExternalWallsType: The type of material of which the external walls are made

ns3::BuildingListPriv

BuildingList: The list of all buildings created during the simulation.

ns3::ItuR1238PropagationLossModel

Frequency: The Frequency (default is 2.106 GHz).

ns3::BuildingsPropagationLossModel

ShadowSigmaOutdoor: Standard deviation of the normal distribution used for calculate the shadowing for outdoor nodes
ShadowSigmaIndoor: Standard deviation of the normal distribution used for calculate the shadowing for indoor nodes
ShadowSigmaExtWalls: Standard deviation of the normal distribution used for calculate the shadowing due to ext walls
InternalWallLoss: Additional loss for each internal wall [dB]

ns3::HybridBuildingsPropagationLossModel

Frequency: The Frequency (default is 2.106 GHz).
Los2NlosThr: Threshold from LoS to NLoS in ITU 1411 [m].
Environment: Environment Scenario
CitySize: Dimension of the city
RooftopLevel: The height of the rooftop level in meters

ns3::RandomBuildingPositionAllocator

WithReplacement: If true, the building will be randomly selected with replacement. If false, no replacement will occur, until the list of buildings to select becomes empty, at which point it will be filled again with the list of all buildings.

ns3::GridBuildingAllocator

GridWidth: The number of objects layed out on a line.
MinX: The x coordinate where the grid starts.
MinY: The y coordinate where the grid starts.
LengthX: the length of the wall of each building along the X axis.
LengthY: the length of the wall of each building along the X axis.
DeltaX: The x space between buildings.
DeltaY: The y space between buildings.
Height: The height of the building (roof level)
LayoutType: The type of layout.

ns3::BulkSendApplication

SendSize: The amount of data to send each time.
Remote: The address of the destination
MaxBytes: The total number of bytes to send. Once these bytes are sent, no data is sent again. The value zero means that there is no limit.
Protocol: The type of protocol to use.

ns3::OnOffApplication

DataRate: The data rate in on state.
PacketSize: The size of packets sent in on state
Remote: The address of the destination
OnTime: A RandomVariableStream used to pick the duration of the 'On' state.
OffTime: A RandomVariableStream used to pick the duration of the 'Off' state.
MaxBytes: The total number of bytes to send. Once these bytes are sent, no packet is sent again, even in on state. The value zero means that there is no limit.
Protocol: The type of protocol to use.

ns3::PacketSink

Local: The Address on which to Bind the rx socket.
Protocol: The type id of the protocol to use for the rx socket.

ns3::Ping6

MaxPackets: The maximum number of packets the application will send
Interval: The time to wait between packets
RemoteIpv6: The Ipv6Address of the outbound packets
LocalIpv6: Local Ipv6Address of the sender
PacketSize: Size of packets generated

ns3::Radvd

AdvertisementJitter: Uniform variable to provide jitter between min and max values of AdvInterval

ns3::UdpClient

MaxPackets: The maximum number of packets the application will send
Interval: The time to wait between packets
RemoteAddress: The destination Address of the outbound packets
RemotePort: The destination port of the outbound packets
PacketSize: Size of packets generated. The minimum packet size is 12 bytes which is the size of the header carrying the sequence number and the time stamp.

ns3::UdpServer

Port: Port on which we listen for incoming packets.
PacketWindowSize: The size of the window used to compute the packet loss. This value should be a multiple of 8.

ns3::UdpTraceClient

RemoteAddress: The destination Address of the outbound packets
RemotePort: The destination port of the outbound packets
MaxPacketSize: The maximum size of a packet (including the SeqTsHeader, 12 bytes).
TraceFilename: Name of file to load a trace from. By default, uses a hardcoded trace.

ns3::UdpEchoClient

MaxPackets: The maximum number of packets the application will send
Interval: The time to wait between packets
RemoteAddress: The destination Address of the outbound packets
RemotePort: The destination port of the outbound packets
PacketSize: Size of echo data in outbound packets

ns3::UdpEchoServer

Port: Port on which we listen for incoming packets.

ns3::V4Ping

Remote: The address of the machine we want to ping.
Verbose: Produce usual output.
Interval: Wait interval seconds between sending each packet.
Size: The number of data bytes to be sent, real packet will be 8 (ICMP) + 20 (IP) bytes longer.

ns3::VirtualNetDevice

Mtu: The MAC-level Maximum Transmission Unit

ns3::CsmaNetDevice

Address: The MAC address of this device.
Mtu: The MAC-level Maximum Transmission Unit
EncapsulationMode: The link-layer encapsulation type to use.
SendEnable: Enable or disable the transmitter section of the device.
ReceiveEnable: Enable or disable the receiver section of the device.
ReceiveErrorModel: The receiver error model used to simulate packet loss
TxQueue: A queue to use as the transmit queue in the device.

ns3::CsmaChannel

DataRate: The transmission data rate to be provided to devices connected to the channel
Delay: Transmission delay through the channel

ns3::LteSpectrumPhy

DataErrorModelEnabled: Activate/Deactivate the error model of data (TBs of PDSCH and PUSCH) [by default is active].
CtrlErrorModelEnabled: Activate/Deactivate the error model of control (PCFICH-PDCCH decodification) [by default is active].

ns3::LteEnbPhy

TxPower: Transmission power in dBm
NoiseFigure: Loss (dB) in the Signal-to-Noise-Ratio due to non-idealities in the receiver. According to Wikipedia (http://en.wikipedia.org/wiki/Noise_figure), this is "the difference in decibels (dB) between the noise output of the actual receiver to the noise output of an ideal receiver with the same overall gain and bandwidth when the receivers are connected to sources at the standard noise temperature T0." In this model, we consider T0 = 290K.
MacToChannelDelay: The delay in TTI units that occurs between a scheduling decision in the MAC and the actual start of the transmission by the PHY. This is intended to be used to model the latency of real PHY and MAC implementations.
UeSinrSamplePeriod: The sampling period for reporting UEs' SINR stats (default value 1)
InterferenceSamplePeriod: The sampling period for reporting interference stats (default value 1)
DlSpectrumPhy: The downlink LteSpectrumPhy associated to this LtePhy
UlSpectrumPhy: The uplink LteSpectrumPhy associated to this LtePhy

ns3::LteUePhy

TxPower: Transmission power in dBm
NoiseFigure: Loss (dB) in the Signal-to-Noise-Ratio due to non-idealities in the receiver. According to Wikipedia (http://en.wikipedia.org/wiki/Noise_figure), this is "the difference in decibels (dB) between the noise output of the actual receiver to the noise output of an ideal receiver with the same overall gain and bandwidth when the receivers are connected to sources at the standard noise temperature T0." In this model, we consider T0 = 290K.
TxMode1Gain: Transmission mode 1 gain in dB
TxMode2Gain: Transmission mode 2 gain in dB
TxMode3Gain: Transmission mode 3 gain in dB
TxMode4Gain: Transmission mode 4 gain in dB
TxMode5Gain: Transmission mode 5 gain in dB
TxMode6Gain: Transmission mode 6 gain in dB
TxMode7Gain: Transmission mode 7 gain in dB
RsrpSinrSamplePeriod: The sampling period for reporting RSRP-SINR stats (default value 1)
DlSpectrumPhy: The downlink LteSpectrumPhy associated to this LtePhy
UlSpectrumPhy: The uplink LteSpectrumPhy associated to this LtePhy
RsrqUeMeasThreshold: Receive threshold for PSS on RSRQ [dB]
UeMeasurementsFilterPeriod: Time period for reporting UE measurements (default 200 ms.)
EnableUplinkPowerControl: If true Uplink Power Control will be enabled

ns3::LteAmc

Ber: The requested BER in assigning MCS (default is 0.00005).
AmcModel: AMC model used to assign CQI

ns3::UeManager

DataRadioBearerMap: List of UE DataRadioBearerInfo by DRBID.
Srb0: SignalingRadioBearerInfo for SRB0
Srb1: SignalingRadioBearerInfo for SRB1
C-RNTI: Cell Radio Network Temporary Identifier

ns3::LteEnbRrc

UeMap: List of UeManager by C-RNTI.
DefaultTransmissionMode: The default UEs' transmission mode (0: SISO)
EpsBearerToRlcMapping: Specify which type of RLC will be used for each type of EPS bearer.
SystemInformationPeriodicity: The interval for sending system information (Time value)
SrsPeriodicity: The SRS periodicity in milliseconds
ConnectionRequestTimeoutDuration: After a RA attempt, if no RRC CONNECTION REQUEST is received before this time, the UE context is destroyed. Must account for reception of RAR and transmission of RRC CONNECTION REQUEST over UL GRANT.
ConnectionSetupTimeoutDuration: After accepting connection request, if no RRC CONNECTION SETUP COMPLETE is received before this time, the UE context is destroyed. Must account for the UE's reception of RRC CONNECTION SETUP and transmission of RRC CONNECTION SETUP COMPLETE.
ConnectionRejectedTimeoutDuration: Time to wait between sending a RRC CONNECTION REJECT and destroying the UE context
HandoverJoiningTimeoutDuration: After accepting a handover request, if no RRC CONNECTION RECONFIGURATION COMPLETE is received before this time, the UE context is destroyed. Must account for reception of X2 HO REQ ACK by source eNB, transmission of the Handover Command, non-contention-based random access and reception of the RRC CONNECTION RECONFIGURATION COMPLETE message.
HandoverLeavingTimeoutDuration: After issuing a Handover Command, if neither RRC CONNECTION RE-ESTABLISHMENT nor X2 UE Context Release has been previously received, the UE context is destroyed.
QRxLevMin: One of information transmitted within the SIB1 message, indicating the required minimum RSRP level that any UE must receive from this cell before it is allowed to camp to this cell. The default value -70 corresponds to -140 dBm and is the lowest possible value as defined by Section 6.3.4 of 3GPP TS 36.133. This restriction, however, only applies to initial cell selection and EPC-enabled simulation.
AdmitHandoverRequest: Whether to admit an X2 handover request from another eNB
AdmitRrcConnectionRequest: Whether to admit a connection request from a UE
RsrpFilterCoefficient: Determines the strength of smoothing effect induced by layer 3 filtering of RSRP in all attached UE; if set to 0, no layer 3 filtering is applicable
RsrqFilterCoefficient: Determines the strength of smoothing effect induced by layer 3 filtering of RSRQ in all attached UE; if set to 0, no layer 3 filtering is applicable

ns3::LteUeRrc

DataRadioBearerMap: List of UE RadioBearerInfo for Data Radio Bearers by LCID.
Srb0: SignalingRadioBearerInfo for SRB0
Srb1: SignalingRadioBearerInfo for SRB1
CellId: Serving cell identifier
C-RNTI: Cell Radio Network Temporary Identifier
T300: Timer for the RRC Connection Establishment procedure (i.e., the procedure is deemed as failed if it takes longer than this)

ns3::LteRlcTm

MaxTxBufferSize: Maximum Size of the Transmission Buffer (in Bytes)

ns3::LteRlcUm

MaxTxBufferSize: Maximum Size of the Transmission Buffer (in Bytes)

ns3::LteRlcAm

PollRetransmitTimer: Value of the t-PollRetransmit (See section 7.3 of 3GPP TS 36.322)
TxOpportunityForRetxAlwaysBigEnough: If true, always pretend that the size of a TxOpportunity is big enough for retransmission. If false (default and realistic behavior), no retx is performed unless the corresponding TxOpportunity is big enough.

ns3::LteNetDevice

Mtu: The MAC-level Maximum Transmission Unit

ns3::LteEnbNetDevice

LteEnbRrc: The RRC associated to this EnbNetDevice
LteHandoverAlgorithm: The handover algorithm associated to this EnbNetDevice
LteAnr: The automatic neighbour relation function associated to this EnbNetDevice
LteFfrAlgorithm: The FFR algorithm associated to this EnbNetDevice
LteEnbMac: The MAC associated to this EnbNetDevice
FfMacScheduler: The scheduler associated to this EnbNetDevice
LteEnbPhy: The PHY associated to this EnbNetDevice
UlBandwidth: Uplink Transmission Bandwidth Configuration in number of Resource Blocks
DlBandwidth: Downlink Transmission Bandwidth Configuration in number of Resource Blocks
CellId: Cell Identifier
DlEarfcn: Downlink E-UTRA Absolute Radio Frequency Channel Number (EARFCN) as per 3GPP 36.101 Section 5.7.3.
UlEarfcn: Uplink E-UTRA Absolute Radio Frequency Channel Number (EARFCN) as per 3GPP 36.101 Section 5.7.3.
CsgId: The Closed Subscriber Group (CSG) identity that this eNodeB belongs to
CsgIndication: If true, only UEs which are members of the CSG (i.e. same CSG ID) can gain access to the eNodeB, therefore enforcing closed access mode. Otherwise, the eNodeB operates as a non-CSG cell and implements open access mode.

ns3::LteUeNetDevice

EpcUeNas: The NAS associated to this UeNetDevice
LteUeRrc: The RRC associated to this UeNetDevice
LteUeMac: The MAC associated to this UeNetDevice
LteUePhy: The PHY associated to this UeNetDevice
Imsi: International Mobile Subscriber Identity assigned to this UE
DlEarfcn: Downlink E-UTRA Absolute Radio Frequency Channel Number (EARFCN) as per 3GPP 36.101 Section 5.7.3.
CsgId: The Closed Subscriber Group (CSG) identity that this UE is associated with, i.e., giving the UE access to cells which belong to this particular CSG. This restriction only applies to initial cell selection and EPC-enabled simulation. This does not revoke the UE's access to non-CSG cells.

ns3::LteHelper

Scheduler: The type of scheduler to be used for eNBs. The allowed values for this attributes are the type names of any class inheriting from ns3::FfMacScheduler.
FfrAlgorithm: The type of FFR algorithm to be used for eNBs. The allowed values for this attributes are the type names of any class inheriting from ns3::LteFfrAlgorithm.
HandoverAlgorithm: The type of handover algorithm to be used for eNBs. The allowed values for this attributes are the type names of any class inheriting from ns3::LteHandoverAlgorithm.
PathlossModel: The type of pathloss model to be used. The allowed values for this attributes are the type names of any class inheriting from ns3::PropagationLossModel.
FadingModel: The type of fading model to be used.The allowed values for this attributes are the type names of any class inheriting from ns3::SpectrumPropagationLossModel.If the type is set to an empty string, no fading model is used.
UseIdealRrc: If true, LteRrcProtocolIdeal will be used for RRC signaling. If false, LteRrcProtocolReal will be used.
AnrEnabled: Activate or deactivate Automatic Neighbour Relation function
UsePdschForCqiGeneration: If true, DL-CQI will be calculated from PDCCH as signal and PDSCH as interference If false, DL-CQI will be calculated from PDCCH as signal and PDCCH as interference

ns3::PointToPointEpcHelper

S1uLinkDataRate: The data rate to be used for the next S1-U link to be created
S1uLinkDelay: The delay to be used for the next S1-U link to be created
S1uLinkMtu: The MTU of the next S1-U link to be created. Note that, because of the additional GTP/UDP/IP tunneling overhead, you need a MTU larger than the end-to-end MTU that you want to support.
X2LinkDataRate: The data rate to be used for the next X2 link to be created
X2LinkDelay: The delay to be used for the next X2 link to be created
X2LinkMtu: The MTU of the next X2 link to be created. Note that, because of some big X2 messages, you need a big MTU.

ns3::RadioBearerStatsCalculator

StartTime: Start time of the on going epoch.
EpochDuration: Epoch duration.
DlRlcOutputFilename: Name of the file where the downlink results will be saved.
UlRlcOutputFilename: Name of the file where the uplink results will be saved.
DlPdcpOutputFilename: Name of the file where the downlink results will be saved.
UlPdcpOutputFilename: Name of the file where the uplink results will be saved.

ns3::PhyStatsCalculator

DlRsrpSinrFilename: Name of the file where the RSRP/SINR statistics will be saved.
UlSinrFilename: Name of the file where the UE SINR statistics will be saved.
UlInterferenceFilename: Name of the file where the interference statistics will be saved.

ns3::MacStatsCalculator

DlOutputFilename: Name of the file where the downlink results will be saved.
UlOutputFilename: Name of the file where the uplink results will be saved.

ns3::PhyTxStatsCalculator

DlTxOutputFilename: Name of the file where the downlink results will be saved.
UlTxOutputFilename: Name of the file where the uplink results will be saved.

ns3::PhyRxStatsCalculator

DlRxOutputFilename: Name of the file where the downlink results will be saved.
UlRxOutputFilename: Name of the file where the uplink results will be saved.

ns3::RadioEnvironmentMapHelper

ChannelPath: The path to the channel for which the Radio Environment Map is to be generated
OutputFile: the filename to which the Radio Environment Map is saved
XMin: The min x coordinate of the map.
YMin: The min y coordinate of the map.
XMax: The max x coordinate of the map.
YMax: The max y coordinate of the map.
XRes: The resolution (number of points) of the map along the x axis.
YRes: The resolution (number of points) of the map along the y axis.
Z: The value of the z coordinate for which the map is to be generated
StopWhenDone: If true, Simulator::Stop () will be called as soon as the REM has been generated
NoisePower: the power of the measuring instrument noise, in Watts. Default to a kT of -174 dBm with a noise figure of 9 dB and a bandwidth of 25 LTE Resource Blocks
MaxPointsPerIteration: Maximum number of REM points to be calculated per iteration. Every point consumes approximately 5KB of memory.
Earfcn: E-UTRA Absolute Radio Frequency Channel Number (EARFCN) as per 3GPP 36.101 Section 5.7.3.
Bandwidth: Transmission Bandwidth Configuration (in number of RBs) over which the SINR will be calculated
UseDataChannel: If true, REM will be generated for PDSCH and for PDCCH otherwise
RbId: Resource block Id, for which REM will be generated,default value is -1, what means REM will be averaged from all RBs

ns3::LteHexGridEnbTopologyHelper

InterSiteDistance: The distance [m] between nearby sites
SectorOffset: The offset [m] in the position for the node of each sector with respect to the center of the three-sector site
SiteHeight: The height [m] of each site
MinX: The x coordinate where the hex grid starts.
MinY: The y coordinate where the hex grid starts.
GridWidth: The number of sites in even rows (odd rows will have one additional site).

ns3::FfMacScheduler

UlCqiFilter: The filter to apply on UL CQIs received

ns3::RrFfMacScheduler

CqiTimerThreshold: The number of TTIs a CQI is valid (default 1000 - 1 sec.)
HarqEnabled: Activate/Deactivate the HARQ [by default is active].
UlGrantMcs: The MCS of the UL grant, must be [0..15] (default 0)

ns3::LteEnbMac

NumberOfRaPreambles: how many random access preambles are available for the contention based RACH process
PreambleTransMax: Maximum number of random access preamble transmissions
RaResponseWindowSize: length of the window (in TTIs) for the reception of the random access response (RAR); the resulting RAR timeout is this value + 3 ms

ns3::LteRadioBearerTag

rnti: The rnti that indicates the UE to which packet belongs
lcid: The id whithin the UE identifying the logical channel to which the packet belongs

ns3::EpsBearerTag

rnti: The rnti that indicates the UE which packet belongs
bid: The EPS bearer id within the UE to which the packet belongs

ns3::PfFfMacScheduler

CqiTimerThreshold: The number of TTIs a CQI is valid (default 1000 - 1 sec.)
HarqEnabled: Activate/Deactivate the HARQ [by default is active].
UlGrantMcs: The MCS of the UL grant, must be [0..15] (default 0)

ns3::FdMtFfMacScheduler

CqiTimerThreshold: The number of TTIs a CQI is valid (default 1000 - 1 sec.)
HarqEnabled: Activate/Deactivate the HARQ [by default is active].
UlGrantMcs: The MCS of the UL grant, must be [0..15] (default 0)

ns3::TdMtFfMacScheduler

CqiTimerThreshold: The number of TTIs a CQI is valid (default 1000 - 1 sec.)
HarqEnabled: Activate/Deactivate the HARQ [by default is active].
UlGrantMcs: The MCS of the UL grant, must be [0..15] (default 0)

ns3::TtaFfMacScheduler

CqiTimerThreshold: The number of TTIs a CQI is valid (default 1000 - 1 sec.)
HarqEnabled: Activate/Deactivate the HARQ [by default is active].
UlGrantMcs: The MCS of the UL grant, must be [0..15] (default 0)

ns3::FdBetFfMacScheduler

CqiTimerThreshold: The number of TTIs a CQI is valid (default 1000 - 1 sec.)
HarqEnabled: Activate/Deactivate the HARQ [by default is active].
UlGrantMcs: The MCS of the UL grant, must be [0..15] (default 0)

ns3::TdBetFfMacScheduler

CqiTimerThreshold: The number of TTIs a CQI is valid (default 1000 - 1 sec.)
HarqEnabled: Activate/Deactivate the HARQ [by default is active].
UlGrantMcs: The MCS of the UL grant, must be [0..15] (default 0)

ns3::FdTbfqFfMacScheduler

CqiTimerThreshold: The number of TTIs a CQI is valid (default 1000 - 1 sec.)
DebtLimit: Flow debt limit (default -625000 bytes)
CreditLimit: Flow credit limit (default 625000 bytes)
TokenPoolSize: The maximum value of flow token pool (default 1 bytes)
CreditableThreshold: Threshold of flow credit (default 0 bytes)
HarqEnabled: Activate/Deactivate the HARQ [by default is active].
UlGrantMcs: The MCS of the UL grant, must be [0..15] (default 0)

ns3::TdTbfqFfMacScheduler

CqiTimerThreshold: The number of TTIs a CQI is valid (default 1000 - 1 sec.)
DebtLimit: Flow debt limit (default -625000 bytes)
CreditLimit: Flow credit limit (default 625000 bytes)
TokenPoolSize: The maximum value of flow token pool (default 1 bytes)
CreditableThreshold: Threshold of flow credit (default 0 bytes)
HarqEnabled: Activate/Deactivate the HARQ [by default is active].
UlGrantMcs: The MCS of the UL grant, must be [0..15] (default 0)

ns3::PssFfMacScheduler

CqiTimerThreshold: The number of TTIs a CQI is valid (default 1000 - 1 sec.)
PssFdSchedulerType: FD scheduler in PSS (default value is PFsch)
nMux: The number of UE selected by TD scheduler (default value is 0)
HarqEnabled: Activate/Deactivate the HARQ [by default is active].
UlGrantMcs: The MCS of the UL grant, must be [0..15] (default 0)

ns3::CqaFfMacScheduler

CqiTimerThreshold: The number of TTIs a CQI is valid (default 1000 - 1 sec.)
CqaMetric: CqaFfMacScheduler metric type that can be: CqaFf, CqaPf
HarqEnabled: Activate/Deactivate the HARQ [by default is active].
UlGrantMcs: The MCS of the UL grant, must be [0..15] (default 0)

ns3::TraceFadingLossModel

TraceFilename: Name of file to load a trace from.
TraceLength: The total length of the fading trace (default value 10 s.)
SamplesNum: The number of samples the trace is made of (default 10000)
WindowSize: The size of the window for the fading trace (default value 0.5 s.)
RbNum: The number of RB the trace is made of (default 100)
RngStreamSetSize: The number of RNG streams reserved for the fading model. The maximum number of streams that are needed for an LTE FDD scenario is 2 * numUEs * numeNBs.

ns3::A2A4RsrqHandoverAlgorithm

ServingCellThreshold: If the RSRQ of the serving cell is worse than this threshold, neighbour cells are consider for handover
NeighbourCellOffset: Minimum offset between serving and best neighbour cell to trigger the Handover

ns3::A3RsrpHandoverAlgorithm

Hysteresis: Handover margin (hysteresis) in dB (rounded to the nearest multiple of 0.5 dB)
TimeToTrigger: Time during which neighbour cell's RSRP must continuously higher than serving cell's RSRP in order to trigger a handover

ns3::LteAnr

Threshold: Minimum RSRQ range value required for detecting a neighbour cell

ns3::LteFfrAlgorithm

FrCellTypeId: Downlink FR cell type ID for automatic configuration,default value is 0 and it means that user needs to configure FR algorithm manually,if it is set to 1,2 or 3 FR algorithm will be configured automatically
EnabledInUplink: If FR algorithm will also work in Uplink, default value true

ns3::LteFrHardAlgorithm

UlSubBandOffset: Uplink Offset in number of Resource Block Groups
UlSubBandwidth: Uplink Transmission SubBandwidth Configuration in number of Resource Block Groups
DlSubBandOffset: Downlink Offset in number of Resource Block Groups
DlSubBandwidth: Downlink Transmission SubBandwidth Configuration in number of Resource Block Groups

ns3::LteFrStrictAlgorithm

UlCommonSubBandwidth: Uplink Common SubBandwidth Configuration in number of Resource Block Groups
UlEdgeSubBandOffset: Uplink Edge SubBand Offset in number of Resource Block Groups
UlEdgeSubBandwidth: Uplink Edge SubBandwidth Configuration in number of Resource Block Groups
DlCommonSubBandwidth: Downlink Common SubBandwidth Configuration in number of Resource Block Groups
DlEdgeSubBandOffset: Downlink Edge SubBand Offset in number of Resource Block Groups
DlEdgeSubBandwidth: Downlink Edge SubBandwidth Configuration in number of Resource Block Groups
RsrqThreshold: If the RSRQ of is worse than this threshold, UE should be served in Edge sub-band
CenterPowerOffset: PdschConfigDedicated::Pa value for Edge Sub-band, default value dB0
EdgePowerOffset: PdschConfigDedicated::Pa value for Edge Sub-band, default value dB0
CenterAreaTpc: TPC value which will be set in DL-DCI for UEs in center areaAbsolute mode is used, default value 1 is mapped to -1 according toTS36.213 Table 5.1.1.1-2
EdgeAreaTpc: TPC value which will be set in DL-DCI for UEs in edge areaAbsolute mode is used, default value 1 is mapped to -1 according toTS36.213 Table 5.1.1.1-2

ns3::LteFrSoftAlgorithm

UlEdgeSubBandOffset: Uplink Edge SubBand Offset in number of Resource Block Groups
UlEdgeSubBandwidth: Uplink Edge SubBandwidth Configuration in number of Resource Block Groups
DlEdgeSubBandOffset: Downlink Edge SubBand Offset in number of Resource Block Groups
DlEdgeSubBandwidth: Downlink Edge SubBandwidth Configuration in number of Resource Block Groups
AllowCenterUeUseEdgeSubBand: If true center UEs can receive on Edge SubBand RBGs
RsrqThreshold: If the RSRQ of is worse than this threshold, UE should be served in Edge sub-band
CenterPowerOffset: PdschConfigDedicated::Pa value for Edge Sub-band, default value dB0
EdgePowerOffset: PdschConfigDedicated::Pa value for Edge Sub-band, default value dB0
CenterAreaTpc: TPC value which will be set in DL-DCI for UEs in center areaAbsolute mode is used, default value 1 is mapped to -1 according toTS36.213 Table 5.1.1.1-2
EdgeAreaTpc: TPC value which will be set in DL-DCI for UEs in edge areaAbsolute mode is used, default value 1 is mapped to -1 according toTS36.213 Table 5.1.1.1-2

ns3::LteFfrSoftAlgorithm

UlCommonSubBandwidth: Uplink Medium (Common) SubBandwidth Configuration in number of Resource Block Groups
UlEdgeSubBandOffset: Uplink Edge SubBand Offset in number of Resource Block Groups
UlEdgeSubBandwidth: Uplink Edge SubBandwidth Configuration in number of Resource Block Groups
DlCommonSubBandwidth: Downlink Medium (Common) SubBandwidth Configuration in number of Resource Block Groups
DlEdgeSubBandOffset: Downlink Edge SubBand Offset in number of Resource Block Groups
DlEdgeSubBandwidth: Downlink Edge SubBandwidth Configuration in number of Resource Block Groups
CenterRsrqThreshold: If the RSRQ of is worse than this threshold, UE should be served in Medium sub-band
EdgeRsrqThreshold: If the RSRQ of is worse than this threshold, UE should be served in Edge sub-band
CenterAreaPowerOffset: PdschConfigDedicated::Pa value for Center Sub-band, default value dB0
MediumAreaPowerOffset: PdschConfigDedicated::Pa value for Medium Sub-band, default value dB0
EdgeAreaPowerOffset: PdschConfigDedicated::Pa value for Edge Sub-band, default value dB0
CenterAreaTpc: TPC value which will be set in DL-DCI for UEs in center areaAbsolute mode is used, default value 1 is mapped to -1 according toTS36.213 Table 5.1.1.1-2
MediumAreaTpc: TPC value which will be set in DL-DCI for UEs in medium areaAbsolute mode is used, default value 1 is mapped to -1 according toTS36.213 Table 5.1.1.1-2
EdgeAreaTpc: TPC value which will be set in DL-DCI for UEs in edge areaAbsolute mode is used, default value 1 is mapped to -1 according toTS36.213 Table 5.1.1.1-2

ns3::LteFfrEnhancedAlgorithm

UlSubBandOffset: Uplink SubBand Offset for this cell in number of Resource Block Groups
UlReuse3SubBandwidth: Uplink Reuse 3 SubBandwidth Configuration in number of Resource Block Groups
UlReuse1SubBandwidth: Uplink Reuse 1 SubBandwidth Configuration in number of Resource Block Groups
DlSubBandOffset: Downlink SubBand Offset for this cell in number of Resource Block Groups
DlReuse3SubBandwidth: Downlink Reuse 3 SubBandwidth Configuration in number of Resource Block Groups
DlReuse1SubBandwidth: Downlink Reuse 1 SubBandwidth Configuration in number of Resource Block Groups
RsrqThreshold: If the RSRQ of is worse than this threshold, UE should be served in Edge sub-band
CenterAreaPowerOffset: PdschConfigDedicated::Pa value for Center Sub-band, default value dB0
EdgeAreaPowerOffset: PdschConfigDedicated::Pa value for Edge Sub-band, default value dB0
DlCqiThreshold: If the DL-CQI for RBG of is higher than this threshold, transmission on RBG is possible
UlCqiThreshold: If the UL-CQI for RBG of is higher than this threshold, transmission on RBG is possible
CenterAreaTpc: TPC value which will be set in DL-DCI for UEs in center areaAbsolute mode is used, default value 1 is mapped to -1 according toTS36.213 Table 5.1.1.1-2
EdgeAreaTpc: TPC value which will be set in DL-DCI for UEs in edge areaAbsolute mode is used, default value 1 is mapped to -1 according toTS36.213 Table 5.1.1.1-2

ns3::LteFfrDistributedAlgorithm

CalculationInterval: Time interval between calculation of Edge sub-band, Default value 1 second
RsrqThreshold: If the RSRQ of is worse than this threshold, UE should be served in Edge sub-band
RsrpDifferenceThreshold: If the difference between the power of the signal received by UE from the serving cell and the power of the signal received from the adjacent cell is less than a RsrpDifferenceThreshold value, the cell weight is incremented
CenterPowerOffset: PdschConfigDedicated::Pa value for Edge Sub-band, default value dB0
EdgePowerOffset: PdschConfigDedicated::Pa value for Edge Sub-band, default value dB0
EdgeRbNum: Number of RB that can be used in edge Sub-band
CenterAreaTpc: TPC value which will be set in DL-DCI for UEs in center areaAbsolute mode is used, default value 1 is mapped to -1 according toTS36.213 Table 5.1.1.1-2
EdgeAreaTpc: TPC value which will be set in DL-DCI for UEs in edge areaAbsolute mode is used, default value 1 is mapped to -1 according toTS36.213 Table 5.1.1.1-2

ns3::LteUePowerControl

ClosedLoop: If true Closed Loop mode will be active, otherwise Open Loop
AccumulationEnabled: If true TCP accumulation mode will be active, otherwise absolute mode will be active
Alpha: Value of Alpha paramter
Pcmax: Max Transmission power in dBm, Default value 23 dBmTS36.101 section 6.2.3
Pcmin: Min Transmission power in dBm, Default value -40 dBmTS36.101 section 6.2.3
PoNominalPusch: P_O_NOMINAL_PUSCH INT (-126 ... 24), Default value -80
PoUePusch: P_O_UE_PUSCH INT(-8...7), Default value 0
PsrsOffset: P_SRS_OFFSET INT(0...15), Default value 7

ns3::YansWifiPhy

EnergyDetectionThreshold: The energy of a received signal should be higher than this threshold (dbm) to allow the PHY layer to detect the signal.
CcaMode1Threshold: The energy of a received signal should be higher than this threshold (dbm) to allow the PHY layer to declare CCA BUSY state
TxGain: Transmission gain (dB).
RxGain: Reception gain (dB).
TxPowerLevels: Number of transmission power levels available between TxPowerStart and TxPowerEnd included.
TxPowerEnd: Maximum available transmission level (dbm).
TxPowerStart: Minimum available transmission level (dbm).
RxNoiseFigure: Loss (dB) in the Signal-to-Noise-Ratio due to non-idealities in the receiver. According to Wikipedia (http://en.wikipedia.org/wiki/Noise_figure), this is "the difference in decibels (dB) between the noise output of the actual receiver to the noise output of an ideal receiver with the same overall gain and bandwidth when the receivers are connected to sources at the standard noise temperature T0 (usually 290 K)". For
State: The state of the PHY layer
ChannelSwitchDelay: Delay between two short frames transmitted on different frequencies.
ChannelNumber: Channel center frequency = Channel starting frequency + 5 MHz * nch
Frequency: The operating frequency.
Transmitters: The number of transmitters.
Recievers: The number of recievers.
ShortGuardEnabled: Whether or not short guard interval is enabled.
LdpcEnabled: Whether or not LDPC is enabled.
STBCEnabled: Whether or not STBC is enabled.
GreenfieldEnabled: Whether or not STBC is enabled.
ChannelBonding: Whether 20MHz or 40MHz.

ns3::YansWifiChannel

PropagationLossModel: A pointer to the propagation loss model attached to this channel.
PropagationDelayModel: A pointer to the propagation delay model attached to this channel.

ns3::WifiMacQueue

MaxPacketNumber: If a packet arrives when there are already this number of packets, it is dropped.
MaxDelay: If a packet stays longer than this delay in the queue, it is dropped.

ns3::DcaTxop

Queue: The WifiMacQueue object

ns3::Dcf

MinCw: The minimum value of the contention window.
MaxCw: The maximum value of the contention window.
Aifsn: The AIFSN: the default value conforms to simple DCA.

ns3::WifiMac

CtsTimeout: When this timeout expires, the RTS/CTS handshake has failed.
AckTimeout: When this timeout expires, the DATA/ACK handshake has failed.
BasicBlockAckTimeout: When this timeout expires, the BASIC_BLOCK_ACK_REQ/BASIC_BLOCK_ACK handshake has failed.
CompressedBlockAckTimeout: When this timeout expires, the COMPRESSED_BLOCK_ACK_REQ/COMPRESSED_BLOCK_ACK handshake has failed.
Sifs: The value of the SIFS constant.
EifsNoDifs: The value of EIFS-DIFS
Slot: The duration of a Slot.
Pifs: The value of the PIFS constant.
Rifs: The value of the RIFS constant.
MaxPropagationDelay: The maximum propagation delay. Unused for now.
Ssid: The ssid we want to belong to.

ns3::RegularWifiMac

QosSupported: This Boolean attribute is set to enable 802.11e/WMM-style QoS support at this STA
HtSupported: This Boolean attribute is set to enable 802.11n support at this STA
CtsToSelfSupported: Use CTS to Self when using a rate that is not in the basic set rate
DcaTxop: The DcaTxop object
VO_EdcaTxopN: Queue that manages packets belonging to AC_VO access class
VI_EdcaTxopN: Queue that manages packets belonging to AC_VI access class
BE_EdcaTxopN: Queue that manages packets belonging to AC_BE access class
BK_EdcaTxopN: Queue that manages packets belonging to AC_BK access class

ns3::WifiRemoteStationManager

IsLowLatency: If true, we attempt to modelize a so-called low-latency device: a device where decisions about tx parameters can be made on a per-packet basis and feedback about the transmission of each packet is obtained before sending the next. Otherwise, we modelize a high-latency device, that is a device where we cannot update our decision about tx parameters after every packet transmission.
MaxSsrc: The maximum number of retransmission attempts for an RTS. This value will not have any effect on some rate control algorithms.
MaxSlrc: The maximum number of retransmission attempts for a DATA packet. This value will not have any effect on some rate control algorithms.
RtsCtsThreshold: If the size of the data packet + LLC header + MAC header + FCS trailer is bigger than this value, we use an RTS/CTS handshake before sending the data, as per IEEE Std. 802.11-2012, Section 9.3.5. This value will not have any effect on some rate control algorithms.
FragmentationThreshold: If the size of the data packet + LLC header + MAC header + FCS trailer is biggerthan this value, we fragment it such that the size of the fragments are equal or smaller than this value, as per IEEE Std. 802.11-2012, Section 9.5. This value will not have any effect on some rate control algorithms.
NonUnicastMode: Wifi mode used for non-unicast transmissions.
DefaultTxPowerLevel: Default power level to be used for transmissions. This is the power level that is used by all those WifiManagers that do notimplement TX power control.

ns3::ApWifiMac

BeaconInterval: Delay between two beacons
BeaconJitter: A uniform random variable to cause the initial beacon starting time (after simulation time 0) to be distributed between 0 and the BeaconInterval.
EnableBeaconJitter: If beacons are enabled, whether to jitter the initial send event.
BeaconGeneration: Whether or not beacons are generated.

ns3::StaWifiMac

ProbeRequestTimeout: The interval between two consecutive probe request attempts.
AssocRequestTimeout: The interval between two consecutive assoc request attempts.
MaxMissedBeacons: Number of beacons which much be consecutively missed before we attempt to restart association.
ActiveProbing: If true, we send probe requests. If false, we don't. NOTE: if more than one STA in your simulation is using active probing, you should enable it at a different simulation time for each STA, otherwise all the STAs will start sending probes at the same time resulting in collisions. See bug 1060 for more info.

ns3::WifiNetDevice

Mtu: The MAC-level Maximum Transmission Unit
Channel: The channel attached to this device
Phy: The PHY layer attached to this device.
Mac: The MAC layer attached to this device.
RemoteStationManager: The station manager attached to this device.

ns3::ArfWifiManager

TimerThreshold: The 'timer' threshold in the ARF algorithm.
SuccessThreshold: The minimum number of sucessfull transmissions to try a new rate.

ns3::AarfWifiManager

SuccessK: Multiplication factor for the success threshold in the AARF algorithm.
TimerK: Multiplication factor for the timer threshold in the AARF algorithm.
MaxSuccessThreshold: Maximum value of the success threshold in the AARF algorithm.
MinTimerThreshold: The minimum value for the 'timer' threshold in the AARF algorithm.
MinSuccessThreshold: The minimum value for the success threshold in the AARF algorithm.

ns3::IdealWifiManager

BerThreshold: The maximum Bit Error Rate acceptable at any transmission mode

ns3::ConstantRateWifiManager

DataMode: The transmission mode to use for every data packet transmission
ControlMode: The transmission mode to use for every control packet transmission.

ns3::AmrrWifiManager

UpdatePeriod: The interval between decisions about rate control changes
FailureRatio: Ratio of minimum erroneous transmissions needed to switch to a lower rate
SuccessRatio: Ratio of maximum erroneous transmissions needed to switch to a higher rate
MaxSuccessThreshold: Maximum number of consecutive success periods needed to switch to a higher rate
MinSuccessThreshold: Minimum number of consecutive success periods needed to switch to a higher rate

ns3::OnoeWifiManager

UpdatePeriod: The interval between decisions about rate control changes
RaiseThreshold: Attempt to raise the rate if we hit that threshold
AddCreditThreshold: Add credit threshold

ns3::RraaWifiManager

Basic: If true the RRAA-BASIC algorithm will be used, otherwise the RRAA wil be used
Timeout: Timeout for the RRAA BASIC loss estimaton block (s)
ewndFor54mbps: ewnd parameter for 54 Mbs data mode
ewndFor48mbps: ewnd parameter for 48 Mbs data mode
ewndFor36mbps: ewnd parameter for 36 Mbs data mode
ewndFor24mbps: ewnd parameter for 24 Mbs data mode
ewndFor18mbps: ewnd parameter for 18 Mbs data mode
ewndFor12mbps: ewnd parameter for 12 Mbs data mode
ewndFor9mbps: ewnd parameter for 9 Mbs data mode
ewndFor6mbps: ewnd parameter for 6 Mbs data mode
poriFor48mbps: Pori parameter for 48 Mbs data mode
poriFor36mbps: Pori parameter for 36 Mbs data mode
poriFor24mbps: Pori parameter for 24 Mbs data mode
poriFor18mbps: Pori parameter for 18 Mbs data mode
poriFor12mbps: Pori parameter for 12 Mbs data mode
poriFor9mbps: Pori parameter for 9 Mbs data mode
poriFor6mbps: Pori parameter for 6 Mbs data mode
pmtlFor54mbps: Pmtl parameter for 54 Mbs data mode
pmtlFor48mbps: Pmtl parameter for 48 Mbs data mode
pmtlFor36mbps: Pmtl parameter for 36 Mbs data mode
pmtlFor24mbps: Pmtl parameter for 24 Mbs data mode
pmtlFor18mbps: Pmtl parameter for 18 Mbs data mode
pmtlFor12mbps: Pmtl parameter for 12 Mbs data mode
pmtlFor9mbps: Pmtl parameter for 9 Mbs data mode

ns3::AarfcdWifiManager

SuccessK: Multiplication factor for the success threshold in the AARF algorithm.
TimerK: Multiplication factor for the timer threshold in the AARF algorithm.
MaxSuccessThreshold: Maximum value of the success threshold in the AARF algorithm.
MinTimerThreshold: The minimum value for the 'timer' threshold in the AARF algorithm.
MinSuccessThreshold: The minimum value for the success threshold in the AARF algorithm.
MinRtsWnd: Minimum value for Rts window of Aarf-CD
MaxRtsWnd: Maximum value for Rts window of Aarf-CD
TurnOffRtsAfterRateDecrease: If true the RTS mechanism will be turned off when the rate will be decreased
TurnOnRtsAfterRateIncrease: If true the RTS mechanism will be turned on when the rate will be increased

ns3::CaraWifiManager

ProbeThreshold: The number of consecutive transmissions failure to activate the RTS probe.
FailureThreshold: The number of consecutive transmissions failure to decrease the rate.
SuccessThreshold: The minimum number of sucessfull transmissions to try a new rate.
Timeout: The 'timer' in the CARA algorithm

ns3::MinstrelWifiManager

UpdateStatistics: The interval between updating statistics table
LookAroundRate: the percentage to try other rates
EWMA: EWMA level
SampleColumn: The number of columns used for sampling
PacketLength: The packet length used for calculating mode TxTime

ns3::QosTag

tid: The tid that indicates AC which packet belongs

ns3::EdcaTxopN

BlockAckThreshold: If number of packets in this queue reaches this value, block ack mechanism is used. If this value is 0, block ack is never used.
BlockAckInactivityTimeout: Represents max time (blocks of 1024 micro seconds) allowed for block ack inactivity. If this value isn't equal to 0 a timer start after that a block ack setup is completed and will be reset every time that a block ack frame is received. If this value is 0, block ack inactivity timeout won't be used.
Queue: The WifiMacQueue object

ns3::MsduStandardAggregator

MaxAmsduSize: Max length in byte of an A-MSDU

ns3::SnrTag

Snr: The snr of the last packet received

ns3::AthstatsWifiTraceSink

Interval: Time interval between reports

ns3::WifiRadioEnergyModel

IdleCurrentA: The default radio Idle current in Ampere.
CcaBusyCurrentA: The default radio CCA Busy State current in Ampere.
TxCurrentA: The radio Tx current in Ampere.
RxCurrentA: The radio Rx current in Ampere.
SwitchingCurrentA: The default radio Channel Switch current in Ampere.
SleepCurrentA: The radio Sleep current in Ampere.
TxCurrentModel: A pointer to the attached tx current model.

ns3::BasicEnergySource

BasicEnergySourceInitialEnergyJ: Initial energy stored in basic energy source.
BasicEnergySupplyVoltageV: Initial supply voltage for basic energy source.
BasicEnergyLowBatteryThreshold: Low battery threshold for basic energy source.
BasicEnergyHighBatteryThreshold: High battery threshold for basic energy source.
PeriodicEnergyUpdateInterval: Time between two consecutive periodic energy updates.

ns3::LiIonEnergySource

LiIonEnergySourceInitialEnergyJ: Initial energy stored in basic energy source.
LiIonEnergyLowBatteryThreshold: Low battery threshold for LiIon energy source.
InitialCellVoltage: Initial (maximum) voltage of the cell (fully charged).
NominalCellVoltage: Nominal voltage of the cell.
ExpCellVoltage: Cell voltage at the end of the exponential zone.
RatedCapacity: Rated capacity of the cell.
NomCapacity: Cell capacity at the end of the nominal zone.
ExpCapacity: Cell Capacity at the end of the exponential zone.
InternalResistance: Internal resistance of the cell
TypCurrent: Typical discharge current used to fit the curves
ThresholdVoltage: Minimum threshold voltage to consider the battery depleted.
PeriodicEnergyUpdateInterval: Time between two consecutive periodic energy updates.

ns3::RvBatteryModel

RvBatteryModelPeriodicEnergyUpdateInterval: RV battery model sampling interval.
RvBatteryModelLowBatteryThreshold: Low battery threshold.
RvBatteryModelOpenCircuitVoltage: RV battery model open circuit voltage.
RvBatteryModelCutoffVoltage: RV battery model cutoff voltage.
RvBatteryModelAlphaValue: RV battery model alpha value.
RvBatteryModelBetaValue: RV battery model beta value.
RvBatteryModelNumOfTerms: The number of terms of the infinite sum for estimating battery level.

ns3::BasicEnergyHarvester

PeriodicHarvestedPowerUpdateInterval: Time between two consecutive periodic updates of the harvested power. By default, the value is updated every 1 s
HarvestablePower: The harvestable power [Watts] that the energy harvester is allowed to harvest. By default, the model will allow to harvest an amount of power defined by a uniformly distributed random variable in 0 and 2.0 Watts

ns3::LinearWifiTxCurrentModel

Eta: The efficiency of the power amplifier.
Voltage: The supply voltage (in Volts).
IdleCurrent: The current in the IDLE state (in Watts).

ns3::UanChannel

PropagationModel: A pointer to the propagation model.
NoiseModel: A pointer to the model of the channel ambient noise.

ns3::UanNoiseModelDefault

Wind: Wind speed in m/s.
Shipping: Shipping contribution to noise between 0 and 1.

ns3::UanPhyGen

CcaThreshold: Aggregate energy of incoming signals to move to CCA Busy state dB.
RxThreshold: Required SNR for signal acquisition in dB.
TxPower: Transmission output power in dB.
RxGain: Gain added to incoming signal at receiver.
SupportedModes: List of modes supported by this PHY.
PerModel: Functor to calculate PER based on SINR and TxMode.
SinrModel: Functor to calculate SINR based on pkt arrivals and modes.

ns3::UanPhyPerGenDefault

Threshold: SINR cutoff for good packet reception.

ns3::UanPhyCalcSinrFhFsk

NumberOfHops: Number of frequencies in hopping pattern.

ns3::UanNetDevice

Channel: The channel attached to this device.
Phy: The PHY layer attached to this device.
Mac: The MAC layer attached to this device.
Transducer: The Transducer attached to this device.

ns3::UanMacCw

CW: The MAC parameter CW.
SlotTime: Time slot duration for MAC backoff.

ns3::UanPropModelThorp

SpreadCoef: Spreading coefficient used in calculation of Thorp's approximation.

ns3::UanPhyDual

CcaThresholdPhy1: Aggregate energy of incoming signals to move to CCA Busy state dB of Phy1.
CcaThresholdPhy2: Aggregate energy of incoming signals to move to CCA Busy state dB of Phy2.
TxPowerPhy1: Transmission output power in dB of Phy1.
TxPowerPhy2: Transmission output power in dB of Phy2.
RxGainPhy1: Gain added to incoming signal at receiver of Phy1.
RxGainPhy2: Gain added to incoming signal at receiver of Phy2.
SupportedModesPhy1: List of modes supported by Phy1.
SupportedModesPhy2: List of modes supported by Phy2.
PerModelPhy1: Functor to calculate PER based on SINR and TxMode for Phy1.
PerModelPhy2: Functor to calculate PER based on SINR and TxMode for Phy2.
SinrModelPhy1: Functor to calculate SINR based on pkt arrivals and modes for Phy1.
SinrModelPhy2: Functor to calculate SINR based on pkt arrivals and modes for Phy2.

ns3::UanMacRc

RetryRate: Number of retry attempts per second (of RTS/GWPING).
MaxFrames: Maximum number of frames to include in a single RTS.
QueueLimit: Maximum packets to queue at MAC.
SIFS: Spacing to give between frames (this should match gateway).
NumberOfRates: Number of rate divisions supported by each PHY.
MinRetryRate: Smallest allowed RTS retry rate.
RetryStep: Retry rate increment.
MaxPropDelay: Maximum possible propagation delay to gateway.

ns3::UanMacRcGw

MaxReservations: Maximum number of reservations to accept per cycle.
NumberOfRates: Number of rates per Phy layer.
MaxPropDelay: Maximum propagation delay between gateway and non-gateway nodes.
SIFS: Spacing between frames to account for timing error and processing delay.
NumberOfNodes: Number of non-gateway nodes in this gateway's neighborhood.
MinRetryRate: Smallest allowed RTS retry rate.
RetryStep: Retry rate increment.
TotalRate: Total available channel rate in bps (for a single channel, without splitting reservation channel).
RateStep: Increments available for rate assignment in bps.
FrameSize: Size of data frames in bytes.

ns3::AcousticModemEnergyModel

TxPowerW: The modem Tx power in Watts
RxPowerW: The modem Rx power in Watts
IdlePowerW: The modem Idle power in Watts
SleepPowerW: The modem Sleep power in Watts

ns3::aodv::RoutingProtocol

HelloInterval: HELLO messages emission interval.
RreqRetries: Maximum number of retransmissions of RREQ to discover a route
RreqRateLimit: Maximum number of RREQ per second.
RerrRateLimit: Maximum number of RERR per second.
NodeTraversalTime: Conservative estimate of the average one hop traversal time for packets and should include queuing delays, interrupt processing times and transfer times.
NextHopWait: Period of our waiting for the neighbour's RREP_ACK = 10 ms + NodeTraversalTime
ActiveRouteTimeout: Period of time during which the route is considered to be valid
MyRouteTimeout: Value of lifetime field in RREP generating by this node = 2 * max(ActiveRouteTimeout, PathDiscoveryTime)
BlackListTimeout: Time for which the node is put into the blacklist = RreqRetries * NetTraversalTime
DeletePeriod: DeletePeriod is intended to provide an upper bound on the time for which an upstream node A can have a neighbor B as an active next hop for destination D, while B has invalidated the route to D. = 5 * max (HelloInterval, ActiveRouteTimeout)
NetDiameter: Net diameter measures the maximum possible number of hops between two nodes in the network
NetTraversalTime: Estimate of the average net traversal time = 2 * NodeTraversalTime * NetDiameter
PathDiscoveryTime: Estimate of maximum time needed to find route in network = 2 * NetTraversalTime
MaxQueueLen: Maximum number of packets that we allow a routing protocol to buffer.
MaxQueueTime: Maximum time packets can be queued (in seconds)
AllowedHelloLoss: Number of hello messages which may be loss for valid link.
GratuitousReply: Indicates whether a gratuitous RREP should be unicast to the node originated route discovery.
DestinationOnly: Indicates only the destination may respond to this RREQ.
EnableHello: Indicates whether a hello messages enable.
EnableBroadcast: Indicates whether a broadcast data packets forwarding enable.
UniformRv: Access to the underlying UniformRandomVariable

ns3::MeshPointDevice

Mtu: The MAC-level Maximum Transmission Unit
RoutingProtocol: The mesh routing protocol used by this mesh point.

ns3::MeshWifiInterfaceMac

BeaconInterval: Beacon Interval
RandomStart: Window when beacon generating starts (uniform random) in seconds
BeaconGeneration: Enable/Disable Beaconing.

ns3::dot11s::PeerLink

RetryTimeout: Retry timeout
HoldingTimeout: Holding timeout
ConfirmTimeout: Confirm timeout
MaxRetries: Maximum number of retries
MaxBeaconLoss: Maximum number of lost beacons before link will be closed
MaxPacketFailure: Maximum number of failed packets before link will be closed

ns3::dot11s::PeerManagementProtocol

MaxNumberOfPeerLinks: Maximum number of peer links
MaxBeaconShiftValue: Maximum number of TUs for beacon shifting
EnableBeaconCollisionAvoidance: Enable/Disable Beacon collision avoidance.

ns3::dot11s::HwmpProtocol

RandomStart: Random delay at first proactive PREQ
MaxQueueSize: Maximum number of packets we can store when resolving route
Dot11MeshHWMPmaxPREQretries: Maximum number of retries before we suppose the destination to be unreachable
Dot11MeshHWMPnetDiameterTraversalTime: Time we suppose the packet to go from one edge of the network to another
Dot11MeshHWMPpreqMinInterval: Minimal interval between to successive PREQs
Dot11MeshHWMPperrMinInterval: Minimal interval between to successive PREQs
Dot11MeshHWMPactiveRootTimeout: Lifetime of poractive routing information
Dot11MeshHWMPactivePathTimeout: Lifetime of reactive routing information
Dot11MeshHWMPpathToRootInterval: Interval between two successive proactive PREQs
Dot11MeshHWMPrannInterval: Lifetime of poractive routing information
MaxTtl: Initial value of Time To Live field
UnicastPerrThreshold: Maximum number of PERR receivers, when we send a PERR as a chain of unicasts
UnicastPreqThreshold: Maximum number of PREQ receivers, when we send a PREQ as a chain of unicasts
UnicastDataThreshold: Maximum number ofbroadcast receivers, when we send a broadcast as a chain of unicasts
DoFlag: Destination only HWMP flag
RfFlag: Reply and forward flag

ns3::dot11s::AirtimeLinkMetricCalculator

TestLength: Rate should be estimated using test length.
Dot11MetricTid: TID used to calculate metric (data rate)

ns3::flame::FlameRtable

Lifetime: The lifetime of the routing enrty

ns3::flame::FlameProtocol

BroadcastInterval: How often we must send broadcast packets
MaxCost: Cost threshold after which packet will be dropped

ns3::Dot11sStack

Root: The MAC address of root mesh point.

ns3::VisualSimulatorImpl

SimulatorImplFactory: Factory for the underlying simulator implementation used by the visualizer.

ns3::ndn::ConsumerBatches

Batches: Batches to schedule. Should be vector, containing pairs of time and amount

ns3::ndn::Consumer

StartSeq: Initial sequence number
Prefix: Name of the Interest
LifeTime: LifeTime for interest packet
RetxTimer: Timeout defining how frequent retransmission timeouts should be checked

ns3::ndn::ConsumerCbr

Frequency: Frequency of interest packets
Randomize: Type of send time randomization: none (default), uniform, exponential
MaxSeq: Maximum sequence number to request

ns3::ndn::ConsumerWindow

Window: Initial size of the window
PayloadSize: Average size of content object size (to calculate interest generation rate)
Size: Amount of data in megabytes to request, relying on PayloadSize parameter (alternative to MaxSeq attribute)
MaxSeq: Maximum sequence number to request (alternative to Size attribute, would activate only if Size is -1). The parameter is activated only if Size negative (not set)
InitialWindowOnTimeout: Set window to initial value when timeout occurs

ns3::ndn::ConsumerZipfMandelbrot

NumberOfContents: Number of the Contents in total
q: parameter of improve rank
s: parameter of power

ns3::ndn::Producer

Prefix: Prefix, for which producer has the data
Postfix: Postfix that is added to the output data (e.g., for adding producer-uniqueness)
PayloadSize: Virtual payload size for Content packets
Freshness: Freshness of data packets, if 0, then unlimited freshness
Signature: Fake signature, 0 valid signature (default), other values application-specific
KeyLocator: Name to be used for key locator. If root, then key locator is not used

ns3::ndn::cs::Lru

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Random

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Fifo

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Lfu

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Lru::AggregateStats

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Random::AggregateStats

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Fifo::AggregateStats

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Lfu::AggregateStats

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Lru::Freshness

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Random::Freshness

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Fifo::Freshness

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Lfu::Freshness

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Probability::Lru

CacheProbability: Set probability of caching in ContentStore. If 1, every content is cached. If 0, no content is cached.

ns3::ndn::cs::ProbabilityImpl::Lru

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Probability::Random

CacheProbability: Set probability of caching in ContentStore. If 1, every content is cached. If 0, no content is cached.

ns3::ndn::cs::ProbabilityImpl::Random

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Probability::Fifo

CacheProbability: Set probability of caching in ContentStore. If 1, every content is cached. If 0, no content is cached.

ns3::ndn::cs::ProbabilityImpl::Fifo

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Probability::Lfu

CacheProbability: Set probability of caching in ContentStore. If 1, every content is cached. If 0, no content is cached.

ns3::ndn::cs::ProbabilityImpl::Lfu

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Lru::LifetimeStats

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Random::LifetimeStats

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Fifo::LifetimeStats

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::cs::Lfu::LifetimeStats

MaxSize: Set maximum number of entries in ContentStore. If 0, limit is not enforced

ns3::ndn::RttEstimator

MaxMultiplier: Maximum RTO Multiplier
InitialEstimation: Initial RTT estimation
MinRTO: Minimum retransmit timeout value
MaxRTO: Maximum retransmit timeout value

ns3::ndn::RttMeanDeviation

Gain: Gain used in estimating the RTT (smoothed RTT), must be 0 < Gain < 1
Gain2: Gain2 used in estimating the RTT (variance), must be 0 < Gain2 < 1

ns3::olsr::RoutingProtocol

HelloInterval: HELLO messages emission interval.
TcInterval: TC messages emission interval.
MidInterval: MID messages emission interval. Normally it is equal to TcInterval.
HnaInterval: HNA messages emission interval. Normally it is equal to TcInterval.
Willingness: Willingness of a node to carry and forward traffic for other nodes.

ns3::FlowMonitor

MaxPerHopDelay: The maximum per-hop delay that should be considered. Packets still not received after this delay are to be considered lost.
StartTime: The time when the monitoring starts.
DelayBinWidth: The width used in the delay histogram.
JitterBinWidth: The width used in the jitter histogram.
PacketSizeBinWidth: The width used in the packetSize histogram.
FlowInterruptionsBinWidth: The width used in the flowInterruptions histogram.
FlowInterruptionsMinTime: The minimum inter-arrival time that is considered a flow interruption.

ns3::dsdv::RoutingProtocol

PeriodicUpdateInterval: Periodic interval between exchange of full routing tables among nodes.
SettlingTime: Minimum time an update is to be stored in adv table before sending outin case of change in metric (in seconds)
MaxQueueLen: Maximum number of packets that we allow a routing protocol to buffer.
MaxQueuedPacketsPerDst: Maximum number of packets that we allow per destination to buffer.
MaxQueueTime: Maximum time packets can be queued (in seconds)
EnableBuffering: Enables buffering of data packets if no route to destination is available
EnableWST: Enables Weighted Settling Time for the updates before advertising
Holdtimes: Times the forwarding Interval to purge the route.
WeightedFactor: WeightedFactor for the settling time if Weighted Settling Time is enabled
EnableRouteAggregation: Enables Weighted Settling Time for the updates before advertising
RouteAggregationTime: Time to aggregate updates before sending them out (in seconds)

ns3::dsr::DsrRouting

RouteCache: The route cache for saving routes from route discovery process.
RreqTable: The request table to manage route requests.
PassiveBuffer: The passive buffer to manage promisucously received passive ack.
MaxSendBuffLen: Maximum number of packets that can be stored in send buffer.
MaxSendBuffTime: Maximum time packets can be queued in the send buffer .
MaxMaintLen: Maximum number of packets that can be stored in maintenance buffer.
MaxMaintTime: Maximum time packets can be queued in maintenance buffer.
MaxCacheLen: Maximum number of route entries that can be stored in route cache.
RouteCacheTimeout: Maximum time the route cache can be queued in route cache.
MaxEntriesEachDst: Maximum number of route entries for a single destination to respond.
SendBuffInterval: How often to check send buffer for packet with route.
NodeTraversalTime: The time it takes to traverse two neighboring nodes.
RreqRetries: Maximum number of retransmissions for request discovery of a route.
MaintenanceRetries: Maximum number of retransmissions for data packets from maintenance buffer.
RequestTableSize: Maximum number of request entries in the request table, set this as the number of nodes in the simulation.
RequestIdSize: Maximum number of request source Ids in the request table.
UniqueRequestIdSize: Maximum number of request Ids in the request table for a single destination.
NonPropRequestTimeout: The timeout value for non-propagation request.
DiscoveryHopLimit: The max discovery hop limit for route requests.
MaxSalvageCount: The max salvage count for a single data packet.
BlacklistTimeout: The time for a neighbor to stay in blacklist.
GratReplyHoldoff: The time for gratuitous reply entry to expire.
BroadcastJitter: The jitter time to avoid collision for broadcast packets.
LinkAckTimeout: The time a packet in maintenance buffer wait for link acknowledgment.
TryLinkAcks: The number of link acknowledgment to use.
PassiveAckTimeout: The time a packet in maintenance buffer wait for passive acknowledgment.
TryPassiveAcks: The number of passive acknowledgment to use.
RequestPeriod: The base time interval between route requests.
MaxRequestPeriod: The max time interval between route requests.
GraReplyTableSize: The gratuitous reply table size.
CacheType: Use Link Cache or use Path Cache
StabilityDecrFactor: The stability decrease factor for link cache
StabilityIncrFactor: The stability increase factor for link cache
InitStability: The initial stability factor for link cache
MinLifeTime: The minimal life time for link cache
UseExtends: The extension time for link cache
EnableSubRoute: Enables saving of sub route when receiving route error messages, only available when using path route cache
RetransIncr: The increase time for retransmission timer when facing network congestion
MaxNetworkQueueSize: The max number of packet to save in the network queue.
MaxNetworkQueueDelay: The max time for a packet to stay in the network queue.
NumPriorityQueues: The max number of packet to save in the network queue.
LinkAcknowledgment: Enable Link layer acknowledgment mechanism

ns3::dsr::DsrOptions

OptionNumber: The Dsr option number.

ns3::SixLowPanNetDevice

Rfc6282: Use RFC6282 (IPHC) if true, RFC4944 (HC1) otherwise.
OmitUdpChecksum: Omit the UDP checksum in IPHC compression.
FragmentReassemblyListSize: The maximum size of the reassembly buffer (in packets). Zero meaning infinite.
FragmentExpirationTimeout: When this timeout expires, the fragments will be cleared from the buffer.
CompressionThreshold: The minimum MAC layer payload size.
ForceEtherType: Force a specific EtherType in L2 frames.
EtherType: The specific EtherType to be used in L2 frames.

ns3::FdNetDevice

Address: The MAC address of this device.
Start: The simulation time at which to spin up the device thread.
Stop: The simulation time at which to tear down the device thread.
EncapsulationMode: The link-layer encapsulation type to use.
RxQueueSize: Maximum size of the read queue. This value limits number of packets that have been read from the network into a memory buffer but have not yet been processed by the simulator.

ns3::LteDataRadioBearerInfo

DrbIdentity: The id of this Data Radio Bearer
EpsBearerIdentity: The id of the EPS bearer corresponding to this Data Radio Bearer
logicalChannelIdentity: The id of the Logical Channel corresponding to this Data Radio Bearer
LteRlc: RLC instance of the radio bearer.
LtePdcp: PDCP instance of the radio bearer.

ns3::LteSignalingRadioBearerInfo

SrbIdentity: The id of this Signaling Radio Bearer
LteRlc: RLC instance of the radio bearer.
LtePdcp: PDCP instance of the radio bearer.